SoTxButler
Sun January 11, 2009 12:43pm
Rating: 10
|
Billet Stack Manifold for High Rise Heads
Another view
|
|
SoTxButler
Sun January 11, 2009 12:43pm
Rating: 10
|
Billet Manifold for High Rise Heads
The bottom is just as "purdy" as the top
|
|
DocDirk
Sat April 25, 2009 1:13pm
|
T at T-stat housing
I had to put a T in because I have no temp sender threaded site in the intake manifold. Probably going to be better to just go ahead and drill one.
|
|
rokndad
Fri June 5, 2009 10:48am
Rating: 10
|
|
*13*
Thu November 26, 2009 8:20am
Rating: 10
|
Weber Manifold
Weber Manifold
|
|
*13*
Sun November 29, 2009 3:44pm
Rating: 10
|
Napa 10764
Installed a makeshift bypass system for my Weber Manifold set up. Seems to have cured the cooling system ailments. Also, fuel was getting too warm. I cut oblong holes in the uprights for the fuel log. Seem to have cured that problem also. So much for that yard work today....
|
|
portmax
Mon December 7, 2009 8:05pm
|
1
my 1991 cardiac cobra,472 ci (460) heavy port job d0ve heads, edelbrock performer rpm cam and manifold,1 inch spacer 850 holly w a 30 cfm stub stack. jacobs ignition, new 3 inch i.d. mufflers,loud??!!!wow!!,four speed ,2.5 gears and still run an easy mid 11s on street tires. fun car astoundingly fast and stable. best recorded mpg 26.5
|
|
magda
Fri April 16, 2010 12:54pm
|
Python
The manifold being modified to allow easier access to coil packs and plugs
|
|
ekrupa2
Thu November 25, 2010 8:48am
|
Ceramic Coating Intake Manifold
Ceramic Coating Intake Manifold
|
|
ekrupa2
Thu November 25, 2010 8:48am
Rating: 10
|
Ceramic Coating Intake Manifold
Ceramic Coating Intake Manifold
|
|
DaveW
Sat November 27, 2010 2:45am
|
LS7 HSV 427 Inlet Manifold
LS7 HSV 427 Inlet Manifold
|
|
DaveW
Fri April 8, 2011 3:46am
|
LS7 and Kinsler Manifold 1
|
|
DaveW
Fri April 8, 2011 3:46am
|
LS7 and Kinsler Manifold 2
|
|
daytonaman
Sat December 3, 2011 8:07pm
|
351C 6-Pack
Ultra rare NASCAR 6-Pack manifold with Mopar Holleys on a 351C
|
|
nanard289
Fri December 30, 2011 1:26pm
Rating: 8
|
step 1
First step is to drill two pair of flanges (one for car side and other for head cylinder side)
|
|
