cobrajeff
Fri October 1, 2004 6:45am
Rating: 10
|
Mustang Export Brace
OEM Ford Export Brace on an Export T-5 Mustang. Note even bolt spacing like early Shelbys.
|
|
Michael C Henry
Tue December 14, 2004 9:00am
Rating: 10
|
Drivers_left_thigh_rest
not my idea but it works great same height as hinge .lets left thigh brace off of it
|
|
cobrajeff
Fri May 13, 2005 1:23pm
Rating: 10
|
Convertible Top - Going
Top raised in rear to accomodate lowered windshield and 427 style rear roll-bar brace (my roll bar is braced forward AND back).
|
|
cobrajeff
Sun September 4, 2005 7:39am
Rating: 10
|
Passenger side bars
I thought a 289-style forward brace would cramp the passenger - so far, no complaints.
|
|
cobrajeff
Sun September 4, 2005 7:39am
Rating: 10
|
Roll bars
I have braced my roll bar fore-and-aft, and welded-in side impact braces, too. Still looks "period-correct" from the outside, but provides a little extra protection.
|
|
cobrajeff
Fri September 16, 2005 2:24pm
Rating: 10
|
Windshield brace
Windshield brace I had fabricated for my car.
|
|
cobrajeff
Fri September 16, 2005 2:24pm
Rating: 10
|
|
Three Peaks
Thu October 27, 2005 1:29pm
Rating: 10
|
Fitting the roll bar braces
|
|
Robert Sobers
Wed November 9, 2005 10:31am
|
Shelby R Model Clone
My 66 Shelby R Clone Specs.
D.S.S. Pro Bullet 306/308 Short Block Level 10 CNC
Rods: Forgings, shot-peened, Magna Fluxed, CNC Diamond resized and fitted with ARP Wave Loc rod bolts. Balanced to racing tolerances.
Crank: Production crankshaft, thermal cleaned, shot-peened, Magna Fluxed, precision ground, oil scooped and chamfered and balanced to racing tolerances.
Pistons: DSS PRO-LITE Forged 2 valve relief flat top, CNC fly-cut for most aftermarket race cams and heads. Balanced to racing tolerances.
Rings: Sealed Power/ Speed-Pro Moly rings.
Bearings: Tri-metal rod and main bearings.
Block: 5.0 roller cam block, thermal cleaned, stress relieved, Magna Fluxed, threads chased, mains checked and corrected, oil galleys tapped for thread in plugs and the decks are CBN squared and equalized.
Transmission- C4 Automatic
Rear End- 8 Inch Detroit Locker 355 Gears.
Gt40Y Heads ported and polished.
Comp Cam by Bennett Racing Cams.
Edelbrock Air Gap Manifold
670 Holley Street Avenger Carb.
1.6 Roller Rockers
MSD Distributor
MDS 6AL Ignition Control Unit
Edelbrock Fuel Pump
Edelbrock Water Pump
AFCO Aluminum Radiator
Canton 7 QT. Oil Pan
Windage Tray
Shelby R Valve Covers with Vent Stacks
Holley Electric Fuel Pump
3/8 Stainless Fuel Line Tank to Pump
Spal Electric Fan
3 ¾ Auto-Meter Tach
Raptor LED Shift Light
Hurst Quarter Shifter with Line-Lock
K&N X-Stream Air Cleaner
Trunk Mounted Battery with Cut Off Switch
PA Performance 3-G Alt.
PA Performance Mini-Starter
Total Control Products Strut Tower Brace System
Total Control Products Sub-Frame Connectors
Auto-Power Roll Bar
Simpson Safety Harness
Hunsaker Racing Seats
Mac Headers
Mac Exhaust System with 2 ½ Inch Dumps.
R-Model Gauge Panel with 2 5/8 Autometer Gauges.
Cobra Country Oil Breather System.
|
|
NKOTB
Thu October 19, 2006 12:46pm
Rating: 10
|
ccx 33835 Cobra Restorers Coilover upgrade new x brace 2006
ccx 33835 Cobra Restorers Coilover upgrade new x brace 2006
|
|
ebiggs1
Mon January 1, 2007 3:41pm
|
|
Trevor Legate
Tue January 9, 2007 10:36am
Rating: 10
|
Brace_of_coupes_interloper
Two Daytonas and another American car...
|
|
mickmate
Mon October 15, 2007 8:02pm
|
Roll bar install CCX
Shows the brackets on Jeffs car where the outside and inside hoop legs and rear brace attach to the frame.
|
|
mickmate
Mon October 15, 2007 8:02pm
|
Roll bar install CCX
Shows the brackets on Jeffs car where the outside and inside hoop legs and rear brace attach to the frame.
|
|
mickmate
Mon October 15, 2007 8:02pm
|
Roll bar install CCX
Shows the brackets on Jeffs car where the outside and inside hoop legs and rear brace attach to the frame.
|
|
