
STROKER
Mon February 3, 2003 6:00pm Rating: 10
|
Dash of 427 SC
Aluminum Dash covered in Leather. Smith & Lucas instruments. Wilwood Brake Bias Adjuster. Forward Angle shifter with custom adaptor for Richmond 6-Speed.
|
|

ronzara
Sun March 9, 2003 12:04pm Rating: 10
|
First Show
10-07-02. I took the Cobra to Pawley's Island, SC for a local car show. I had it listed as "work in progress". It got A LOT of attention, even as it sits. I look forward to the completion. It should show well.
|
|

Bruce Edwards
Fri January 23, 2004 5:32pm Rating: 10
|
427 Roller
Another shot of the 427 car. Ever wonder why the early cars run hot? The rad was set back at the top and the air would run straight over the top and not through the rad. Guess what happens if you lean it forward?
|
|

boxhead
Mon April 5, 2004 4:51am Rating: 10
|
waiting for shifter
here is my T56 gearbox after carrying out modification to move the selector to the forward position
|
|

boxhead
Mon April 5, 2004 4:53am Rating: 10
|
selector all modified
here you can see where the new selector lever will be over the forward cover plate
|
|

Dwight
Sat October 16, 2004 8:16pm
|
DSCN1707
RAIN X; DRIVE FASTER & LEAN FORWARD
|
|

Pete Munroe
Thu October 21, 2004 12:59am Rating: 10
|
ERA 289 FIA #2027
Moved shifter to the "forward" position in the TKO housing. This is about same location as top-loader shift would be. Patch gives you an idea how far back shifter was before. Shifter is a piece from Mike Forte's shop. The doublers on the floor are for the seat mounting bolts.
|
|

Rick Parker
Sun November 7, 2004 11:52am Rating: 10
|
Remote filter & cooler plumbing
Oil goes out of the engine to the filter and then forward to the cooler then back into the engine. I intend to install a thermostat.
|
|

Michael C Henry
Sat January 15, 2005 4:34pm Rating: 10
|
balast_with_multiple_male_blades
When bypassing the box I have to move one wire from left to the right. Left or rear is power in. forward or right is resisted power for coil and a yellow from starter solinoid for resister bypass when starting.
|
|

cobrajeff
Fri May 13, 2005 1:23pm Rating: 10
|
Convertible Top - Going
Top raised in rear to accomodate lowered windshield and 427 style rear roll-bar brace (my roll bar is braced forward AND back).
|
|