55312
Fri April 13, 2007 10:49am
|
70 Triumph Restore - harness
|
|
Rebel1
Sun June 24, 2007 9:13pm
|
|
Rebel1
Sun June 24, 2007 9:13pm
|
|
Rebel1
Sun June 24, 2007 9:13pm
|
|
scales
Mon January 14, 2008 1:03am
Rating: 10
|
Wiring harness for sequntial lights.
|
|
TWOOD
Sun February 24, 2008 10:04am
Rating: 10
|
Harness from dash to front and rear
The harness passes through the firewall, above the transmission, and splits into three directions. 1. left side of engine (temp sensors, distributor, horn, lights). 2. right side of engine (battery, starter, alternator). 3. Everything at rear of car.
|
|
iwantacobra427
Thu March 20, 2008 7:20pm
Rating: 10
|
|
cobrajam
Sun April 6, 2008 8:48pm
|
Unnamed wiring harness from CC advertiser
Box of wires. No instructions.
|
|
Dans65
Tue April 8, 2008 7:38pm
|
Dans65 FFR
All the lights are installed and functioning perfectly, we are amazed no cliches from our wire trimming the original wire harness from my donor car.
|
|
fkemmerer
Wed July 16, 2008 11:32am
Rating: 10
|
Firewall with electrical
Pictures of ERA #753 in the final stages of assembly. Shows all of the eletricals and wiring harness installed on the firewall.
|
|
fkemmerer
Thu September 18, 2008 3:12pm
|
ERA 753 - Electircal Progress
This is a picture of the FAST XFI Fuel Injectoion computer and assocaited wiring harness assembly off the car.
|
|
RJCCOBRA
Tue December 2, 2008 3:07pm
|
Shell Valley build
The 390 FE (formerly owned by Bob Brown) was removed from the frame so that all of the mounts (engine, roll bar, shoulder harness, oil filter, etc.) could be final welded and the frame painted. The oil dipstick tube was relocated to the outside of the lower alternator bolt.
|
|
martrogers
Wed April 29, 2009 2:30am
|
Wiper Mechanism
Built a slider mechanism to convert the donor car wiper motor into a normal cobra push-pull assembly. The throw is adjustable to obtain the correct wiper angle.
I did this because:
1.Commodore replacement motor will be easyto get in future
2.Plugs easily into the harness giving full functionality
3.Cheap - came with the donor car!
|
|
kitcarbp
Tue June 23, 2009 7:01am
Rating: 10
|
alternator fuse with power distribution
I upgraded my electrical system to handle my twin SPAL fans (18A x 2 = 36 AMPS) by installing a modern Alt fuse power box. I used 4 gauge cable from alt to fuse and fuse to battery. It now serves my twin fans and main harness from this point and will give me an underhood power point.
|
|
Pete Munroe
Wed July 22, 2009 9:58pm
Rating: 10
|
ERA 289 FIA shoulder harness mount
Roll bar mount for raising the shoulder harness. Moved one of the belt anchors to the outside of the roll bar. For the inside anchor I welded a bracket on the bar. Point was to be symmetrical to where I mounted the seat. Did not mount the seat as suggested in the "offset" position. Wanted it directly back from the pedals. Did lose some leg room by not doing the normal "offset".
|
|
