D&M2
Sun April 27, 2008 4:39am
|
Re-assembling everything for the last time (hopefully)
Re-assembling the bits and pieces to create a final product.
|
|
fkemmerer
Wed July 16, 2008 11:32am
|
Front Nose
Pictures of ERA #753 in the final stages of assembly. Shows the nose of the car. Note the polished aluminum pieces inside the nose including the polished fans.
|
|
fkemmerer
Wed July 16, 2008 11:32am
Rating: 10
|
Trunk and Electricals
Pictures of ERA #753 in the final stages of assembly. This shows all of the electrical pieces inside the polished trunk.
|
|
RJCCOBRA
Thu January 29, 2009 3:22pm
|
Shell Valley build
Got the hood prop rod fabricated and installed. I used a piece of 5/16 inch OD 304 stainless and a stainless sherical rod end.
|
|
Clois Harlan
Mon March 9, 2009 6:32pm
|
HCS Body side shot
Notice the outer skin of the door is still taped in place for final fitments and then the adhesive will be applied to make it one piece.
|
|
428street
Wed March 11, 2009 10:51am
|
|
63mercury
Wed July 15, 2009 1:49pm
|
bottom of foot box
this piece is 10 gauge sheet metal ( .134 ) I don't want anything comming into the cabin uninvited.
|
|
63mercury
Thu October 1, 2009 6:09pm
|
|
eschaider
Mon October 5, 2009 10:42pm
|
One Piece Oil Pan Bottom & Sides
One piece bottom with baffle and swinging pickup
|
|
Wbulk
Mon December 7, 2009 5:14pm
Rating: 10
|
Fuel Filler Modification
Pieces for the Modified B and B Fuel Filler.
|
|
CoupedUp
Fri May 14, 2010 9:37pm
Rating: 10
|
|
cobrarkc
Fri August 27, 2010 4:58am
Rating: 10
|
Outboard big brake conversion pieces
|
|
Wbulk
Wed September 1, 2010 1:41pm
|
B and B Door Hinge Modification
By drilling out the hinge for tapered bolts this allows for the door panel to set flush with door. Extra piece of 1/8" steel added in the front for strength.
|
|
lal Naja
Sat August 6, 2011 1:57pm
|
The custom machined hub.
The black part is by Grant. The polished aluminum piece is what I machined up to accept the horn button and Nardi wheel.
|
|
Rotax98
Tue December 27, 2011 7:59pm
|
ah_the_lengths_we_went_to_to_measure_Motion_ratio
We made some weird and wonderful tools like this interesting piece to measure motion tration through the arc of wheel travel. The pen in the tube marked the increments on the plate at intervals as we lifted the wheel from droop to bump
|
|
