Terry1
Sun August 19, 2007 3:32pm
Rating: 1
|
IRS - Upper Control Arm
Fabricated clevis for 10% shorter, adjustable upper control arm for T-bird IRS - compared to stock piece
|
|
Terry1
Sun August 19, 2007 3:32pm
|
IRS - Upper Control Arm
Fabricated clevis for 10% shorter, adjustable upper control arm for T-bird IRS
|
|
Baz
Mon March 31, 2008 1:06am
|
Fully Adjustable Upper Arms
Ball Joints screw in.
|
|
Baz
Mon June 23, 2008 5:48pm
Rating: 10
|
Front_suspension_installed_Small_
Independent Jaguar suspension and brakes with adjustable Spax Gas Shocks.
|
|
donraye
Tue July 8, 2008 4:26pm
|
1966 Street Beast Cobra, Grabber Orange
This is the car in June 2008 before several recent changes were made. Additions included front and rear 12 way adjustable coil over conversions, custom upper and lower rear control arms with polyurethane bushings and upper rear Spherical Bearings, passenger side roll bar, 17" authentic Hallibrand wheels and Kuhmo tires, stainless heat shields on side pipes, custom grilles on all front oppenings, heavy duty oil cooler, LPS rear "Ultimate 8.8" differential cover, engine and firewall paint work to match exterior color, new orthopedic seats in grey leather, and other ninor changes. All work was done by me.
|
|
vettestr
Wed August 13, 2008 9:42am
|
HiPo 289 engine
1966 HiPo 289, Adjustable rockers with guide plates. #C6AE dated Feb. 21, 1967
|
|
Baz
Mon December 8, 2008 10:11pm
Rating: 10
|
Fuel_Lines_and_Fuel_Pressure_Regulator_fitted_Small_
The Fuelab adjustable Fuel Pressure Regulator is set to 60lb.
|
|
DocDirk
Sat April 25, 2009 1:59pm
Rating: 10
|
|
martrogers
Wed April 29, 2009 2:30am
|
Wiper Mechanism
Built a slider mechanism to convert the donor car wiper motor into a normal cobra push-pull assembly. The throw is adjustable to obtain the correct wiper angle.
I did this because:
1.Commodore replacement motor will be easyto get in future
2.Plugs easily into the harness giving full functionality
3.Cheap - came with the donor car!
|
|
kitcarbp
Mon September 21, 2009 7:20am
Rating: 10
|
West Coast Griffin Rad Brackets
Here is a shot of my custom rad brackets made from 1/8 x 1.5" aluminum strip. Its a two peice design without welds and is adjustable to the core thickness. This core is 2.75" wide. I used High density EPDM sponge foam to line the inside of the bracket to absord vibration and protect the core frame.
|
|
cobramatt
Fri November 13, 2009 9:13am
|
fully independent Hiedt adjustable suspension
|
|
FUNFER2
Sat February 6, 2010 5:18am
Rating: 10
|
Hanger
This hanger has a weld tab that is shaped to fit the muffler housing and with the supplied bolts, is adjustable.
|
|
MaSnaka
Thu March 18, 2010 8:35pm
|
DSC03225_Large_
brake master cylinder pushrod modified for adjustable pedal height
|
|
Jim Kellogg
Wed September 15, 2010 6:45pm
|
Remote filter adapter with adjustable cooler flow
Added a Beaumont Metal Works remote oil filter adapter with manual adjustment for flow to the oil cooler for those "cool" drives.
|
|
Jim Kellogg
Wed September 15, 2010 6:45pm
|
Remote filter adapter with adjustable cooler flow
Added a Beaumont Metal Works remote oil filter adapter with manual adjustment for flow to the oil cooler for those "cool" drives.
|
|
