BeasleyRB
Thu January 15, 2009 12:04pm
|
Oil Pan modified
Pan had a big hump in the bottom plus the oil drain plug. I had the hump removed, repositioned the drain plug and put a 3/16 thick skid plate on the bottom. I try not to but sometimes the engine "kisses" the high spots in the roads in Oklahoma
|
|
BeasleyRB
Thu January 15, 2009 12:04pm
|
Oil Pan modified
Pan had a big hump in the bottom plus the oil drain plug. I had the hump removed, repositioned the drain plug and put a 3/16 thick skid plate on the bottom. I try not to but sometimes the engine "kisses" the high spots in the roads in Oklahoma
|
|
bmeyer29
Mon March 2, 2009 1:58pm
Rating: 10
|
351W hoses prior to surge tank addition
|
|
bmeyer29
Mon March 2, 2009 1:58pm
Rating: 10
|
351W after Kirkham surge tank pix1
NOTE: I replaced the two hose adapters in the tank with brass plugs
|
|
bmeyer29
Mon March 2, 2009 1:58pm
Rating: 10
|
351W after Kirkham surge tank pix2
NOTE: I replaced the two hose adapters in the tank with brass plugs
|
|
bmeyer29
Mon March 2, 2009 1:58pm
Rating: 10
|
351W after Kirkham surge tank pix3
NOTE: I replaced the two hose adapters in the tank with brass plugs
|
|
bmeyer29
Mon March 2, 2009 1:58pm
Rating: 10
|
351W after Kirkham surge tank pix4
NOTE: I replaced the two hose adapters in the tank with brass plugs
|
|
Sinjin
Thu June 18, 2009 5:02pm
|
351W stoked to 427 - 520HP
|
|
52chevyred
Fri January 1, 2010 6:51am
|
351W with SB Headers
This is the dummy 351W with the headers from Street Beasts. Earlier, I tried Factory Five headers, but they just wouldn't work out on this body.
|
|
52chevyred
Fri January 1, 2010 6:51am
|
351W centered with headers
This is the 351W dummy located, with headers.
|
|
52chevyred
Fri January 1, 2010 7:50am
|
Street Beasts Driver Sidepipe
Here is the Street Beasts sidepipe on the driver side. Another lesson learned: if you use a 351W for mock up and are installing a 302, THERE IS A DIFFERENCE! The 302 is 2" narrower (at the head) and about 1" lower (at the head) than the 351. We had to "adjust" the motor mounts when I put the dummy 302 in.
|
|
Cobra 29
Wed August 4, 2010 5:29pm
Rating: 9.5
|
Use of adapters to fit FE valve covers to 351W
Installed valve cover adapters from SuperHart. These are 3/8" thick and are bearly seen!
|
|
SoTxButler
Sat November 6, 2010 4:34pm
|
|
SoTxButler
Sat November 6, 2010 4:47pm
Rating: 10
|
|
glenview289
Tue February 22, 2011 7:03am
Rating: 10
|
351W-stack system by 'Very Cool Parts'
351W-stack system by 'Very Cool Parts'
|
|
