jdog
Mon February 7, 2005 6:19pm
Rating: 10
|
427fe Erson roller rockers!
Aluminum Edelbrock heads
|
|
got snake?
Fri April 8, 2005 5:13am
Rating: 10
|
|
mloy
Sat July 16, 2005 2:00pm
|
Cobra Engine.
'86 5.0L engine. .030 over, forged pistons, X303 hydraulic roller cam, Edelbrock Performer aluminum heads, Cobra Intake, Open-letter Cobra valve covers. '65 front timing cover, new oil pan. Balanced and assembled by a NASCAR engine builder. Runs pretty good....
|
|
Dirtrich
Tue February 21, 2006 7:43pm
Rating: 10
|
SPF 1660 "roadster"
351/418 Stroker 505hp build sheet...
• Blue printed machined 351W version Early Casting Block ('69) with Block Girdle Installed
• Scat Forged Steel 4.100 Stroke Crankshaft
• H Beam Rods 6.200" - ARP HD Rod Bolts
• Power Forged 10.5 to 1 Flat Top HP Pistons
• J & E Chrome Moly Ring Set
• Heavy Duty Double Roller Dynagear Timing Set
• Comp Cams Hydraulic Roller Retrofit Camshaft
• Clevite H series Racing Bearings
• Polished Edelbrock Victor Jr. cylinder heads
• Chrome Moly Hardened pushrods
• High Intensity Scorpion True Roller Rockers
• Melling HV Oil pump with Hardened FMS Drive Rod.
• Complete Fel-pro Gasket set
• Heavy Duty Harmonic Balancer
• New SFI Approved 10.5 inch Standard Flywheel
• Aluminum Timing cover
• Aluminum Finned Ford Racing Valve Covers
• New Fuel Lines and Gas Filter
• Polished Edelbrock Vic Jr. Single Plane
• Edelbrock 800 cfm 4 barrel w/ electric choke
• Elec Accel Billet Distributor & high voltage Coil
• High Flow Polished Aluminum Water & Fuel Pump
• Champion Spark plugs w/ 8mm ACCEL Spiral Wires
• New Chrome Thermostat Housing
• Oval aluminum finned air cleaner w/ Cobra logo
• Chrome 100 amp. Alternator and Polished Brackets
• March Pulley Setup with Serpentine-Belt
|
|
hotrods27
Thu April 27, 2006 9:40am
Rating: 10
|
|
Asking $26,200 It is a 289 with fuel injection, 24 lb injectors, Harland Sharp roller rocker arms, Edelbrock Performer RPM manifold, a small ISKY performance cam with 467. lift and has great mid-range power and wines up quick. Only has 2834 miles on it and ready to drive anywhere.
|
|
HSSS427
Thu July 13, 2006 6:56pm
Rating: 10
|
1966 Police Interceptor vs Edelbrock Performer RPM
|
|
HSSS427
Thu July 13, 2006 6:56pm
Rating: 10
|
1966 Police Interceptor vs Edelbrock Performer RPM
|
|
Carnut427
Sat July 29, 2006 11:00am
Rating: 10
|
Chevy Crossram
Edelbrock Crossram on smallblock Chevy
|
|
Carnut427
Sat July 29, 2006 11:00am
Rating: 10
|
Cobra Crossram
Edelbrock Crossram on FE Cobra under restoration
|
|
cobra522
Sat September 2, 2006 1:59pm
|
Holley 950HP, K&N, Edelbrock Victor
|
|
Jerry Clayton
Mon February 5, 2007 12:34pm
Rating: 10
|
LS 1 goodies
Edelbrock manifold
|
|
Jerry Clayton
Mon February 5, 2007 12:34pm
Rating: 10
|
LS 1 goodies
Edelbrock manifold
|
|
Jerry Clayton
Mon February 5, 2007 12:34pm
Rating: 10
|
LS 1 goodies
Edelbrock manifold and Dart heads
|
|
buildride
Thu March 1, 2007 11:55pm
|
1967 427 S.C. Cobra Viper Blue
1967 427 S.C. Cobra Viper Blue.Smeding 427 Cobra Special. Bored and stroked to 427 cu.in., 450hp 450ft lbs est., 10.2:1 comp. 351 SVO Sportsman II block 4.030” bore, 4340 forged crank 4.170” stroke, forged pistons floating pin, 4340 steel H beam rods 7/16 ARP bolts, engine balanced to ½ gram, roller cam .493/.510 lift 279/289 dur, Edelbrock Performer RPM aluminum heads 2.02/1.60 SS valves springs single w/damper, dual roller timing chain, aluminum roller rockers 1.6 ratio, Intake Edelbrock aluminum performer, Holley 600 four barrel, HEI dist, March serpentine billet aluminum pulley set.
|
|
RNT
Sat June 30, 2007 7:13am
|
Engine10
460 Ford Racing, Aluminum SCJ Jon Kaase Heads, Edelbrock RPM Performer, Holley 770 Carburator
|
|
