simon clemens
Mon June 28, 2004 6:40am
|
rear_sidepipe_mount_
very stable & strong, both rubber mounts have a compression force
|
|
Secret Squirrel
Tue December 7, 2004 8:18am
Rating: 10
|
Modified Side Pipe Mount Attached
Final installation of side pipe with modified mounting bracket with rubber insulator bolted between with grade 8 bolt and crown lock nut, 12/6/2004. Update: Use 2 Rubber Insulators if needed for leveling.
|
|
Cameron Parsons
Fri January 21, 2005 1:56pm
Rating: 10
|
|
Blair
Sun June 26, 2005 9:07pm
Rating: 10
|
Tyre_Pile
It's Hard to Sleep with that rubber Smell in ya ROOM
|
|
mloy
Sat July 16, 2005 2:00pm
|
289 Motor Mount
Fairlane mount with new lower rubber. Both eBay specials.
|
|
WASP
Sat February 11, 2006 9:57pm
|
No smoke
Sadly not burning rubber but blowing out a welch plug
|
|
Rick Parker
Thu January 18, 2007 9:34pm
Rating: 10
|
Frame insulation
I purchased canvas belting (Cub Scout?) and glued it to the chassis. I was afraid that rubber might squeek or degrade.
|
|
ceslaw
Mon March 5, 2007 7:18pm
|
Interior view, January 2007
Everett Morrison, Interior view. The stainless steel supports under the dash, ash tray (used to hold ear plugs) and rubber shift boot added to the EM kit to enhance the 'original' look.
|
|
Trueoo7
Tue March 6, 2007 6:55pm
Rating: 1
|
|
Trueoo7
Tue March 6, 2007 6:55pm
|
|
slow_motion
Wed March 28, 2007 12:01pm
|
17" Billet rims and Nitto rubber
|
|
slow_motion
Wed March 28, 2007 12:05pm
|
WIDE Nitto rubber up front
|
|
slow_motion
Wed March 28, 2007 12:15pm
|
5.75" DEEP-dish 17" billet rims w/Nitto drag rubber 315's
|
|
1Cobrat
Sat January 26, 2008 4:08pm
Rating: 10
|
A Day in the Shop
Just completed hood and door rubber molding
|
|
martrogers
Fri February 29, 2008 9:42pm
|
Bonnet Lip Milling Tool
The bonnet lip was variable thickness which made fitting a seal rubber difficult. This tool was lashed up by fixing a metal guide to a drill with Jubilee clips and using a milling bit. Worked very well as can be seen form the amount of fibreglass swarf.
|
|
