Z-linkCobra
Mon November 2, 2009 11:08am
|
Passanger side.
building the passanger side up with foam. You have to aware of the ambient temp. Anything below 80 and you dont get the expansion like you should. Takes alot more foam when its cooler.
|
|
kitcarbp
Sat November 28, 2009 5:27pm
Rating: 10
|
Derale PS cooler installed
The 24 inch frame rail cooler worked great on my mounts in front of radiator. This cooler reduced my reservoir fluid temps from 250F down to 140 F !
|
|
kitcarbp
Sat November 28, 2009 6:09pm
Rating: 10
|
Mcleod steel flywheel for 460
This also shows my home made engine plate I made with a jig saw and a nice set of files. Trick was to use the old rusted one as my template and the starter bolt holes and register bore was my datum point to ensure correct starter alignment.
|
|
kitcarbp
Fri January 22, 2010 12:19pm
Rating: 10
|
V8 oil cooler
Ford Explorer V8 oil cooler. LONG made this OEM oil cooler for the mid 90's Explorers, if I can shoe horn this into place, it just might be the cooler I was looking for to keep the 460 oil temps uniform. This is hooked up in-line with the lower rad hose. This should have very good water flow rates to cool the oil.
|
|
750hp
Tue February 2, 2010 1:14am
Rating: 10
|
|
kitcarbp
Thu October 14, 2010 7:33am
Rating: 10
|
Temp Gauges
Temp Gauges for Engine FIre-Up
|
|
jcraigau
Tue March 15, 2011 1:12am
|
Body Dolly
Temporary storage for the shell until the chassis is ready to go
|
|
frdfver
Mon August 22, 2011 4:14pm
|
Sidepipes and headers back from coaters....
Sidepipes and headers back from Coating. Sidepipes done with ceramic shiny silver color, headers done in the titanium high temp with thermal barrier sprayed inside.
|
|
double-rr
Thu November 17, 2011 5:34am
|
HM-2005 Build Photos
IRS Temp Installed
|
|
Dwight
Mon January 2, 2012 7:00pm
Rating: 10
|
fan diagram
diagram of a fan with switch and temp controler
|
|
Jim Kellogg
Sun October 21, 2012 2:58pm
|
Winter Snake
I used to use cardboard to keep oil and coolant temps up on my daily drives to work. Now use a Beaumont adjustable oil temp setup. Works great, and now a much "cleaner" appearance in the winter.
|
|
justcobra
Sun January 6, 2013 7:22pm
|
RMC Series 3
Shell on trailer with door opened and roll over bar in temporary position,
|
|
justcobra
Sun January 6, 2013 7:30pm
|
RMC Series 3
Left hand photos showing door opened with red buckets fitted although temporary.
These buckets were previously fitted to a older Cobra and bought on ebay for $100 a pair.
They are SAAS modified seats with a 41cm base/cushion
The seats look good but I think a little narrow!
|
|
Wazza
Tue April 9, 2013 9:51pm
|
Temporary Dash Brow Pad for Rego
|
|
RET_COP
Sun September 1, 2013 11:10am
Rating: 10
|
20130831_133624
Finished exhaust temporarily sprayed with VHT Aluminum
|
|
