 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
|
|
|
|
1 |
2 |
| 3 |
4 |
5 |
6 |
7 |
8 |
9 |
| 10 |
11 |
12 |
13 |
14 |
15 |
16 |
| 17 |
18 |
19 |
20 |
21 |
22 |
23 |
| 24 |
25 |
26 |
27 |
28 |
29 |
30 |
| 31 |
|
|
|
|
|
|
|
|
CC Advertisers
|
|
ford428
Fri January 30, 2004 3:11am
|
750_1dp
#4779 750cfm choke tower milled off, will now flow 770cfm all new parts w or w/o new fuel line, ready to bolt on and go
|
|
Bruce Edwards
Thu May 6, 2004 3:53pm
Rating: 10
|
Bill's 351W front 2
Another picture of Bill's 351W (TampaFla) for his 289 ERA.
Somethings you do not see but that I will post when I get more time.
Forged Keith Black pistons .30, Double row timing set, .10/.10 crank, Hand fit Sealed Power 1/16 moly rings, trimetal Clevite 77 bearings, HP/HV Melling pump with a HD drive, Edelbrock Performer RPM cam, Roller tip rockers, Brass freeze plugs, Windage tray, Oil pan baffle welded into bottom of pan, Oil temp bung brazed to side of pan, High Rev anti pump up lifters, ARP Studs for mains,ARP rod bolts, modified oil pick up, treaded front oil galley plugs, matched block oil passage to oil pump and FelPro gaskets
|
|
Pete Munroe
Thu October 21, 2004 12:59am
Rating: 10
|
ERA 289 FIA #2027
Moved shifter to the "forward" position in the TKO housing. This is about same location as top-loader shift would be. Patch gives you an idea how far back shifter was before. Shifter is a piece from Mike Forte's shop. The doublers on the floor are for the seat mounting bolts.
|
|
jorocks
Sat January 15, 2005 4:14pm
|
2000 Johnex Shelby Cobra Replica
2000 Johnex Shelby Cobra Replica, designed by Can-Am Motosports, out Toronto, Canada, This one owner, lady driven cobra, arrived Turn Key from Johnex Motorsports in Nov., 2000. This is not a donor (completely assembled with new, custom automotive parts). This Cobra is not your average replica; Johnex commissioned one of the most successful race-chassis design firms in North America, CSC Racing (Canadian Stock Car), to design this frame. The "space" or "three dimensional" frame is a stronger, race ready frame, designed to handle race tuned, big block power unlike the weaker "ladder" or "two-dimentional" frames used on most other replicas. The powder coated tubular frame uses 2" x 4" rectangular steel tubing as the main perimeter rail and 1 3/4" tubular upper frame rails with a triple cowl hoop for addtional support. Johnex has since changed hands after the production of this Cobra and is now Johnex 3. This replica is comparable to the more well know Superformance and ERA replicas.
For additional info go to:
- www.houseofcobras.com/johnex.html
- www.clubcobra.com/
- www.fordmuscle.com/archives/2000/01/cobrarep/index.shtml
- http://www.centralservicesinc.com/johnex/index.html
- www.cscracing.com
BASIC INFO
- Lady Driven
- One Owner
- Owned Clear Title
- VIN Assigned
- Passed British Columbia, Canada Vehicle Safety Inspection
PERFORMANCE
- 0 to 60 miles in 5.6 seconds (using clutch)
- Approx. 320 HP (not tested)
- 2464 pounds
BODY & STYLE
- BMW blue, hand laid and baked fiberglass body
- Chrome roll bar (bolted to frame) and polished aluminum side vent louvers
- Polished stainless steel gas cap
- Flat black side pipes and bumperettes
- Brass chrome plated winsheild frame and chrome plated wipers
- Adjustable driver seat (fits 5’0” to 6’4” tall)
- Black vinyl/carpet, VDO gages.
- RJS 2" 4 point racing harness
- 15" Chrome plated, Flat Spoke 5 stars
- BF Goodrich T/A's; P215/60R15 front, P245/60R15 rear
ENGINE & SUSPENTION
- Assembled with all new high performance parts
- Ford 5.0 block and crank (machined, relieved and fully balanced)
- Eldelbrock Performance intake manifold (aluminum)
- 600 CFM holley carburetor (custome jetted)
- MSD 6 A ignition system
- Ford T5/standard transmission
- Billet aluminum pulley's
- Hydrolic clutch conversion (Wilwood billet slave cylinder)
- CSC Racing designed tubular frame chassis using 2"x 4" rectangular steel tubing as the main perimeter frame rail and 1 3/4" round tube upper frame rails with a triple cowl hoop for additional support. Frame is finished in black Powder Coat.
- Double-sheer suspension bracketry, coil over suspension with adjustable ride height front and rear. Springs are finished in a yellow Powder Coat. Tubular A- Arms finished in red Powder Coat.
- Tildon pedals. Dual master cylinder brake system with 11" disc, oversized calipers in
front and drum brakes in the rear. Adjustble bias.
- Manual stearing, rack and pinion (ready for power conversion, just needs nascar style pump plumbed in).
- Ford 8.8" rear end, limited slip, 3.55 gear ratio.
- 2734 miles.
CONDITION OF SALE
Payable by bank draft. No trades. No test pilots, serious inqires only. Ownership and registation of the vehicle will be transfered to the buyer after the selling price is paid in full. The buyer will be responsible for all transportation arrangements and any cost related to the purchase. Car is sold as is. This cobra is appraised at $41 000. US or $50 000. CAN and is priced to sell at $29 000. US or $35 000. CAN obo.
|
|
jorocks
Sat January 15, 2005 4:19pm
|
2000 Johnex Shelby Cobra Replica
2000 Johnex Shelby Cobra Replica, designed by Can-Am Motosports, out Toronto, Canada, This one owner, lady driven cobra, arrived Turn Key from Johnex Motorsports in Nov., 2000. This is not a donor (completely assembled with new, custom automotive parts). This Cobra is not your average replica; Johnex commissioned one of the most successful race-chassis design firms in North America, CSC Racing (Canadian Stock Car), to design this frame. The "space" or "three dimensional" frame is a stronger, race ready frame, designed to handle race tuned, big block power unlike the weaker "ladder" or "two-dimentional" frames used on most other replicas. The powder coated tubular frame uses 2" x 4" rectangular steel tubing as the main perimeter rail and 1 3/4" tubular upper frame rails with a triple cowl hoop for addtional support. Johnex has since changed hands after the production of this Cobra and is now Johnex 3. This replica is comparable to the more well know Superformance and ERA replicas.
For additional info go to:
- www.houseofcobras.com/johnex.html
- www.clubcobra.com/
- www.fordmuscle.com/archives/2000/01/cobrarep/index.shtml
- http://www.centralservicesinc.com/johnex/index.html
- www.cscracing.com
BASIC INFO
- Lady Driven
- One Owner
- Owned Clear Title
- VIN Assigned
- Passed British Columbia, Canada Vehicle Safety Inspection
PERFORMANCE
- 0 to 60 miles in 5.6 seconds (using clutch)
- Approx. 320 HP (not tested)
- 2464 pounds
BODY & STYLE
- BMW blue, hand laid and baked fiberglass body
- Chrome roll bar (bolted to frame) and polished aluminum side vent louvers
- Polished stainless steel gas cap
- Flat black side pipes and bumperettes
- Brass chrome plated winsheild frame and chrome plated wipers
- Adjustable driver seat (fits 5’0” to 6’4” tall)
- Black vinyl/carpet, VDO gages.
- RJS 2" 4 point racing harness
- 15" Chrome plated, Flat Spoke 5 stars
- BF Goodrich T/A's; P215/60R15 front, P245/60R15 rear
ENGINE & SUSPENTION
- Assembled with all new high performance parts
- Ford 5.0 block and crank (machined, relieved and fully balanced)
- Eldelbrock Performance intake manifold (aluminum)
- 600 CFM holley carburetor (custome jetted)
- MSD 6 A ignition system
- Ford T5/standard transmission
- Billet aluminum pulley's
- Hydrolic clutch conversion (Wilwood billet slave cylinder)
- CSC Racing designed tubular frame chassis using 2"x 4" rectangular steel tubing as the main perimeter frame rail and 1 3/4" round tube upper frame rails with a triple cowl hoop for additional support. Frame is finished in black Powder Coat.
- Double-sheer suspension bracketry, coil over suspension with adjustable ride height front and rear. Springs are finished in a yellow Powder Coat. Tubular A- Arms finished in red Powder Coat.
- Tildon pedals. Dual master cylinder brake system with 11" disc, oversized calipers in
front and drum brakes in the rear. Adjustble bias.
- Manual stearing, rack and pinion (ready for power conversion, just needs nascar style pump plumbed in).
- Ford 8.8" rear end, limited slip, 3.55 gear ratio.
- 2734 miles.
CONDITION OF SALE
Payable by bank draft. No trades. No test pilots, serious inqires only. Ownership and registation of the vehicle will be transfered to the buyer after the selling price is paid in full. The buyer will be responsible for all transportation arrangements and any cost related to the purchase. Car is sold as is. This cobra is appraised at $41 000. US or $50 000. CAN and is priced to sell at $29 000. US or $35 000. CAN obo.
|
|
wayne johnson
Thu February 10, 2005 6:16am
Rating: 10
|
strap your self in
full engine rebuild
yella terra roller rockers, hi compression hi top pistons and rings, full gasket set,
heads ported, matched, flow tested to 600hp, race cam, Gilmore supercharger belt drive
system, tuned extractors, 850 double pumper carbie, engine colour matched to colour of car
|
|
W2zero
Sat May 14, 2005 8:14pm
|
Homeslice Tracton Masters
Adjustable with poly-bushed Morrison ss rod ends. Double adjustable with left and right threads. 1/25 tubing and all home fabbed.
|
|
bobcowan
Mon November 7, 2005 8:16pm
Rating: 10
|
Racetrack3
Fairly tight double apex corner. Theat's a Porsche on the right. He would start to get close by the end of the last tight corner. But didn't have the power to hang with us through the front and back stretch. Gotto work on my suspension.
|
|
Dirtrich
Tue February 21, 2006 7:43pm
Rating: 10
|
SPF 1660 "roadster"
351/418 Stroker 505hp build sheet...
• Blue printed machined 351W version Early Casting Block ('69) with Block Girdle Installed
• Scat Forged Steel 4.100 Stroke Crankshaft
• H Beam Rods 6.200" - ARP HD Rod Bolts
• Power Forged 10.5 to 1 Flat Top HP Pistons
• J & E Chrome Moly Ring Set
• Heavy Duty Double Roller Dynagear Timing Set
• Comp Cams Hydraulic Roller Retrofit Camshaft
• Clevite H series Racing Bearings
• Polished Edelbrock Victor Jr. cylinder heads
• Chrome Moly Hardened pushrods
• High Intensity Scorpion True Roller Rockers
• Melling HV Oil pump with Hardened FMS Drive Rod.
• Complete Fel-pro Gasket set
• Heavy Duty Harmonic Balancer
• New SFI Approved 10.5 inch Standard Flywheel
• Aluminum Timing cover
• Aluminum Finned Ford Racing Valve Covers
• New Fuel Lines and Gas Filter
• Polished Edelbrock Vic Jr. Single Plane
• Edelbrock 800 cfm 4 barrel w/ electric choke
• Elec Accel Billet Distributor & high voltage Coil
• High Flow Polished Aluminum Water & Fuel Pump
• Champion Spark plugs w/ 8mm ACCEL Spiral Wires
• New Chrome Thermostat Housing
• Oval aluminum finned air cleaner w/ Cobra logo
• Chrome 100 amp. Alternator and Polished Brackets
• March Pulley Setup with Serpentine-Belt
|
|
fastraxsg
Sun October 8, 2006 8:11am
Rating: 10
|
Meg_6
Double handful, my two little loves
|
|
Burgs
Wed October 18, 2006 4:42pm
Rating: 10
|
|
1bad66
Mon December 4, 2006 9:18am
Rating: 5.5
|
|
1985 CCX
Sun December 24, 2006 8:29am
Rating: 10
|
Twin Carters on 426 Hemi
My Hemi in the garage as a teen. Made a great bike stand.
|
|
Ls6venom
Tue July 10, 2007 7:42pm
|
double venom
Quaker Steak and Lube Friday night
|
|
fastraxsg
Wed June 25, 2008 7:28am
|
Double decker
old girl tucks in under the Hurricane with enough room front and back
|
|
|
All times are GMT -7. The time now is 08:25 PM.
Links monetized by VigLink |
