 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
1 |
2 |
3 |
4 |
5 |
6 |
| 7 |
8 |
9 |
10 |
11 |
12 |
13 |
| 14 |
15 |
16 |
17 |
18 |
19 |
20 |
| 21 |
22 |
23 |
24 |
25 |
26 |
27 |
| 28 |
29 |
30 |
|
|
|
|
|
|
CC Advertisers
|
|
hsv300
Fri February 23, 2007 2:07pm
Rating: 10
|
Billett
New Billett flywheel
|
|
cwmcobra
Fri March 23, 2007 7:24am
|
Chipped Flywheel
Proper starter alignment should fix this.
|
|
Anthony
Wed April 4, 2007 7:55pm
Rating: 10
|
Chassis Dyno - Last Run 427 High Riser
Self built 427 SO, stock stroke, 429 ci., Dove aluminum High Riser heads, mildly ported, 10.5 : 1 CR, original holley 780 cfm LeMans carb, vacuum secondary, on an original single four BBL , dual plane, Hi-Riser intake. Chassis Dyno is at Performance Engineering, Hamilton, OH.
Carb jets changed, and timing adjusted by Performance Engineering. Picked up 80 ft-lbs torque and 60 hp by chassis dyno tuning.
With a 20% loss, estimated max flywheel torque is about 600, with about 570 flywheel HP at 5900 rpm's and still climbing.
The torque curve is pretty flat.
|
|
Anthony
Wed April 4, 2007 7:57pm
|
Chassis Dyno - Last Run 427 Hi-Riser Air-Fuel Ratio
Self built 427 SO, stock stroke, 429 ci., Dove aluminum High Riser heads, mildly ported, 10.5 : 1 CR, original holley 780 cfm LeMans carb, vacuum secondary, on an original single four BBL , dual plane, Hi-Riser intake. Chassis Dyno is at Performance Engineering, Hamilton, OH.
Carb jets changed, and timing adjusted by Performance Engineering. Picked up 80 ft-lbs torque and 60 hp by chassis dyno tuning.
With a 20% loss, estimated max flywheel torque is about 600, with about 570 flywheel HP at 5900 rpm's and still climbing.
|
|
Anthony
Sat June 2, 2007 7:56am
|
chassis dyno Roush 427R
Here is a chassis dyno of a Roush 427R crate engine, as installed in a Superformance. They have installed many of these 427R engines in cobra's, and this is the best output any of the 427R engines had made. They are rated by Roush at 550 HP and 535 torque at the flywheel. The engine was not run above 5800 rpm's where you would expect to see max HP, but the max torque is a good value.
I wanted to use this engine as a benchmark to compare my 427 SO engine to. Both cars running the same sidepipes.
|
|
cobrajam
Sun November 18, 2007 6:06pm
|
391 FT Steel Crank
knife edged and lightened, went from 75lbs to 65lbs, 3.78in stroke, .010/.010, machined snout and flywheel face to fit FE
|
|
krazykarl
Tue February 19, 2008 6:37pm
|
Mcleod flywheel and pressure plate
Mcleod flywheel and pressure plate only weighs 21 lbs total
|
|
Pinoy2
Sun April 6, 2008 12:37am
|
427W,TKO 600 and aluminum flywheel ready for assembly.
|
|
sambo
Sun January 11, 2009 5:48pm
|
|
Rwillia4
Sat June 6, 2009 4:30pm
|
|
kitcarbp
Sat November 28, 2009 6:09pm
Rating: 10
|
Mcleod steel flywheel for 460
This also shows my home made engine plate I made with a jig saw and a nice set of files. Trick was to use the old rusted one as my template and the starter bolt holes and register bore was my datum point to ensure correct starter alignment.
|
|
Kramer
Sun April 10, 2011 11:40am
|
|
silverstripe
Thu June 28, 2012 10:02am
|
DSCN0109
351 roller cam engine stroked to 427cu. forged pistons,H beam rods,ARP studs throughout,AFR heads,9qt canton road race oil pan.polished pulleys and bracket kit. high volume oil pump. billet mallory dist. billet fordmotorsports flywheel.high torque mini starter. elect fuel pump.billet air cleaner. 10.2 compression.
|
|
Kramer
Tue June 25, 2013 9:04am
|
latest flywheel I have to talke out
McLeod 184
|
|
Kramer
Tue June 25, 2013 9:05am
|
pulled started
flywheel teeth
|
|
|
All times are GMT -7. The time now is 07:53 AM.
Links monetized by VigLink |
