1985 CCX
Sat February 3, 2007 2:45pm
Rating: 10
|
New High Flow Milodon
High flow Milodon to partner with the new Fluidyne. Machined and tapped heater ports so they can be nicely plugged. The plugs are Chromed Brass and all new mounting bolts are Stainless.
|
|
FatBoy
Mon February 5, 2007 2:38pm
Rating: 10
|
Contemporary Chassis Details
This photo shows the mouting points for the roll bar prior to painting and assembly. The bracket high up on the outside of the right tube supports the outside leg, while the inside leg bolts to the two holes in the top of the cross-member.
|
|
buildride
Thu March 1, 2007 11:55pm
|
1967 427 S.C. Cobra Viper Blue
1967 427 S.C. Cobra Viper Blue.Smeding 427 Cobra Special. Bored and stroked to 427 cu.in., 450hp 450ft lbs est., 10.2:1 comp. 351 SVO Sportsman II block 4.030” bore, 4340 forged crank 4.170” stroke, forged pistons floating pin, 4340 steel H beam rods 7/16 ARP bolts, engine balanced to ½ gram, roller cam .493/.510 lift 279/289 dur, Edelbrock Performer RPM aluminum heads 2.02/1.60 SS valves springs single w/damper, dual roller timing chain, aluminum roller rockers 1.6 ratio, Intake Edelbrock aluminum performer, Holley 600 four barrel, HEI dist, March serpentine billet aluminum pulley set.
|
|
William Gooch
Thu June 5, 2008 8:39pm
|
Slave cylinder mounted to TKO500
Slave cylinder mounted using existing bolts on transmission
|
|
TWOOD
Mon September 1, 2008 3:51pm
|
alternate possible position, rectangular side to frame
Note straight edge of bracket is in contact with the shock tower and the only one of the two holes will align with the mounting bolts.
|
|
DAVID GAGNARD
Sun April 26, 2009 5:03pm
|
|
eschaider
Thu July 16, 2009 9:22pm
|
SPS vs ARP Head View
Comparison of OEM SPS TTY to Reusable ARP Side Bolts
|
|
eschaider
Thu July 16, 2009 9:22pm
Rating: 10
|
SPS vs ARP Profile View
Comparison of OEM SPS TTY to Reusable ARP Side Bolts
|
|
eschaider
Tue August 11, 2009 10:58pm
|
Hardened Side Bolt Washers
Hardened Side Bolt Washers
|
|
eschaider
Tue August 11, 2009 10:58pm
|
Custom Replacement Side Bolts
Custom Replacement Side Bolt Dwg
|
|
Z-linkCobra
Mon October 19, 2009 1:58pm
|
Build pics
Machined off the riser that the stock pump bolts to across the top. Really cleaned it up I think.
|
|
kitcarbp
Sat November 7, 2009 3:04pm
Rating: 10
|
side pipe bracket 35-183
WCC side pipe bracket with rubber insulator uses 5/16 bolts to secure
|
|
52chevyred
Fri January 1, 2010 7:24am
|
Gas Tank Installed
Installed with bolts thru frame
|
|
FUNFER2
Sat February 6, 2010 5:18am
Rating: 10
|
Hanger
This hanger has a weld tab that is shaped to fit the muffler housing and with the supplied bolts, is adjustable.
|
|
Z-linkCobra
Thu February 18, 2010 8:25am
|
Trunk hinge support
When I got this kit the trunk lid and hood were not attached to their frames. So before joining the two together I figured I would give the hinges something solid to bolt to...and also add some strength. The holes are 5/8 and I am making some press fit threaded collars to put in the holes for 3/8 bolts.
|
|
