n6opv
Mon January 19, 2009 11:05pm
|
Arntz notched cowl
Arntz loved Chevy engines but with the engine set so far back in his chassis, the distributor ended up under the cowl. This notch was his solution on some late Type 3 cars and all Type 4. For those of us with Ford engines, it allows plenty of room for the oval Cobra air cleaner or dual quads. This notch did not appear on any Butler cars.
|
|
DocDirk
Wed April 8, 2009 7:27pm
|
Lower rear arm
Free to move upwards with about 1/4 " room above the arm in the gusset.....
|
|
DocDirk
Wed April 8, 2009 8:38pm
|
Right rear lower link arm at axle
Rotated view of rear lower link arm right side showing square link arm attached inside a square receptacle on the axle...very little or no room for rotaion with axle movement.
|
|
Pete Munroe
Wed July 22, 2009 9:58pm
Rating: 10
|
ERA 289 FIA shoulder harness mount
Roll bar mount for raising the shoulder harness. Moved one of the belt anchors to the outside of the roll bar. For the inside anchor I welded a bracket on the bar. Point was to be symmetrical to where I mounted the seat. Did not mount the seat as suggested in the "offset" position. Wanted it directly back from the pedals. Did lose some leg room by not doing the normal "offset".
|
|
PCC
Thu August 27, 2009 3:14am
Rating: 10
|
|
Mark IV
Sun November 8, 2009 12:52pm
Rating: 10
|
|
Dwight
Thu November 26, 2009 7:47pm
|
back room of the shop
welding area in the shop
|
|
cobrajeff
Tue December 22, 2009 8:07am
|
Cut-off frame rails
To make room for 427-style side exhaust, ERA modified my outer frame rails - thye had to be cut short to make room for the pipes to go through the body.
|
|
ou812545
Tue February 23, 2010 11:59am
Rating: 10
|
|
magda
Fri April 16, 2010 12:57pm
|
Python
Our uniquie in floor pedal system allows for easy access and more room in the engine bay (no booster required)
|
|
krausewich
Sun May 30, 2010 5:21am
|
Plenty O' room for a fullsize spare !!
Plenty O' room for a fullsize spare !!
|
|
LT65
Mon July 12, 2010 5:22am
|
|
krausewich
Sat July 17, 2010 8:26am
|
Thats right, room for 2 extra inches of paydirt in there!
|
|
tin-man
Sat October 2, 2010 5:58am
Rating: 10
|
Roush 511 Engine Build Progress
Birthing room at Roush
|
|
tin-man
Sun October 31, 2010 3:59am
Rating: 10
|
Hi-Tech Automotive S.A. SPF2984 build progress
Lots of room in this trunk.
|
|
