Robert McLinden
Mon November 3, 2008 8:04am
Rating: 10
|
Kirkham KMPS036
Being stripped down for powder coating
|
|
Dons429AC
Thu November 6, 2008 2:16pm
|
IRS Frame, RUCC
Frame in process of being built
|
|
RJCCOBRA
Thu November 13, 2008 3:17pm
|
Shell Valley build
Being able to use Buddy's garage and hoist is great.
|
|
RJCCOBRA
Fri December 12, 2008 3:03pm
|
Shell Valley build
Here are the side pipes and headers back from being ceramic coated. Motorsports Powder Coating in Delavan, WI did the coating.
|
|
bermblaster41
Mon December 22, 2008 3:25am
|
1222080021
sleeve removed and reducer prior to being cut down
|
|
Ken Williams
Tue March 3, 2009 5:18pm
|
At Operation Comfort
Some of the Texas Cobra Club members went to a Ranch south of San Antonio where disabled Vets from Brooks Army Hospital are being rehabilitated. We gave rides and donated some tools
|
|
kitcarbp
Fri March 6, 2009 7:29am
Rating: 9
|
Ford_Raditor_Heat_Rejection_Chart- Street Rod Example
This chart compares the heat rejection rate (cooling capacity) of three different types of radiators tested on an old Ford Street Rod. Coolant flow rate is held constant at 7 gpm (typical flow at idle perhaps, not sure where its being measured ???). It graphs the heat rejection for each radiator versus air flow through the radiator core. It is comparing 3 diff rad designs/materials at different CFMs through the core. The more air flow you have for a given coolant flow rate (7 gpm in this example) , the higher the heat rejection, basically linear in this example. The author of this graph is most likely selling the high efficiency radiator showing the improvement over the other two designs. To sum it up, the radiator at the top of the chart appears to be the most efficient at a low coolant flow rate (7 gal/min) over all air flows tested. Ya see how important rad core/tank design is? I learned something here.
|
|
Garage10
Sun April 19, 2009 10:37pm
|
rad
Notice the 5/8 hose barb on the upper right. That was being fed from surge tank. I will plug it and now go to outlet to water pump instead.
|
|
ilttlc
Fri April 24, 2009 7:42am
|
2009 Pinewood Derby Lineup
From Left to Right - My ten year old's, my 5 year old's, my 7 year old's, the pack show car, and dad's cobra. All being prepared.
|
|
AlexCobra
Fri October 2, 2009 9:32am
|
|
pgermond
Sun November 1, 2009 4:34pm
Rating: 10
|
Mather Auto-X
The Mustang turned in the fastest time of the day, with the Cobra being second.
|
|
52chevyred
Fri January 1, 2010 7:50am
|
Steering Rack Problem
Here is a steering rack problem we found: the brackets are wrong, including one being "upside down" from the factory. I guess the "quality guy" was on vacation. 
|
|
Wazza
Mon January 25, 2010 6:01pm
|
Race Cobra
Being loaded on trailer , ready to race.
|
|
Wbulk
Wed March 24, 2010 7:56am
Rating: 10
|
Upper Shock Mounts
New Upper shock mounts being cut on Kirkhams water jet.
|
|
magda
Fri April 16, 2010 12:54pm
|
Python
The manifold being modified to allow easier access to coil packs and plugs
|
|
