Sam Bozzette
Sat January 27, 2007 4:51pm
|
|
stallion112
Mon January 29, 2007 2:58pm
|
|
RNT
Wed January 31, 2007 7:13pm
|
1966 GT Replica by Fiberfab
This is a kit car I built in 1966. VW chassis, Porsche 1600 engine. The clamshell top was opened hydraulically by pushing a button and then you slid in and hoped a semi didn't run you over.
|
|
greg schroeder
Mon February 5, 2007 2:37pm
|
3rd gear data
3rd gear G-tech data vs. changes Superformance 2040 with Roush 427R-095
The power values represented are G-tech HP. This should not be confused with any other method of testing HP. It's only a number of reference.
Just as wheel HP on a chassis dyno is lower than flywheel HP because of additional drive line loss, the G-tech HP is lower than chassis dyno due to additional resistance such as aero drag and road resistance, even amount of air in tires would have a factor. As speed increases aero drag as well as other rolling resistance increase. For example as an estimate @ 50 mph there is an equivalent of approximately -12 HP, @ 100 mph -90 HP, @ 130 mph right about -200 HP for the shape of the Cobra.
|
|
FatBoy
Mon February 5, 2007 2:38pm
Rating: 10
|
Contemporary Chassis Details
|
|
FatBoy
Mon February 5, 2007 2:38pm
Rating: 10
|
Contemporary Chassis Details
This photo shows the mouting points for the roll bar prior to painting and assembly. The bracket high up on the outside of the right tube supports the outside leg, while the inside leg bolts to the two holes in the top of the cross-member.
|
|
Morris
Fri February 9, 2007 3:59pm
|
D-Shaft Loop welded into chassis
|
|
D&M2
Sun February 25, 2007 2:03pm
|
Chassis Prepped for Powdercoating
Finally, the chassis has been welded and prepped for sandblasting and powdercoating
|
|
D&M2
Sun February 25, 2007 2:32pm
Rating: 10
|
Chassis Crated and Loaded
My little helper after the chassis had been crated and loaded
|
|
D&M2
Sun February 25, 2007 2:34pm
|
Front View of Powdercoated Chassis
This is the front view of the chassis once it was powdercoated.
|
|
D&M2
Sun February 25, 2007 2:36pm
|
Close up of Powdercoated Chassis
This is a close up view of the powdercoated chassis
|
|
mj_duell
Tue February 27, 2007 5:25am
|
The New EVO 6 rolling chassis
The New EVO 6 rolling chassis
|
|
mj_duell
Fri March 2, 2007 8:09am
Rating: 10
|
New EVO 6 Chassis
New EVO 6 Chassis with standard IRS
|
|
mj_duell
Fri March 2, 2007 8:09am
Rating: 10
|
New EVO 6 Chassis
New EVO 6 Chassis with standard IRS
|
|
mj_duell
Fri March 2, 2007 8:09am
|
New EVO 6 Chassis
New EVO 6 Chassis with standard IRS
|
|
