"Q"
Thu September 11, 2008 9:57pm
Rating: 10
|
Ever seen something like this before?
Cobras from South Africa
|
|
427SnakeSC
Sun September 14, 2008 7:50am
Rating: 10
|
My 427 SO
This is the Keith Craft built 427 SO installed in my CSX.
|
|
fkemmerer
Thu September 18, 2008 3:12pm
|
ERA 753 - Electircal Progress
This is a picture of the FAST XFI Fuel Injectoion computer and assocaited wiring harness assembly off the car.
|
|
fkemmerer
Thu September 18, 2008 3:12pm
|
ERA 753 - Electircal Progress
This is a picture of the final wiring to the fuel pressure and driveshaft sensor on my ERA.
|
|
bmeyer29
Sun September 28, 2008 5:24pm
Rating: 10
|
Custom half-height windshield, Okie style!
I suspect this custom windshield cost no more that a buck ninety eight...
|
|
fkemmerer
Sat October 4, 2008 2:13pm
|
ERA 753 - Accelerometer
This is a picture of the accelerometer that I've installed in our cobra. It allows the FAST XFI computer in the car to record G forces while the car is in operation.
|
|
Mdman352
Wed October 8, 2008 7:16am
|
new motor
This is a FE medium riser motor stroked to 454 with a hydraulic roller cam. Dyno results are 470 HP and 564 Ft of torque.
|
|
Mdman352
Wed October 8, 2008 7:16am
|
new motor
This is a FE medium riser motor stroked to 454 with a hydraulic roller cam. Dyno results are 470 HP and 564 Ft of torque.
|
|
Mdman352
Wed October 8, 2008 7:16am
Rating: 10
|
new motor
This is a FE medium riser motor stroked to 454 with a hydraulic roller cam. Dyno results are 470 HP and 564 Ft of torque.
|
|
Mdman352
Wed October 8, 2008 7:16am
|
new motor
This is a FE medium riser motor stroked to 454 with a hydraulic roller cam. Dyno results are 470 HP and 564 Ft of torque.
|
|
Mdman352
Wed October 8, 2008 7:16am
|
new motor
This is a FE medium riser motor stroked to 454 with a hydraulic roller cam. Dyno results are 470 HP and 564 Ft of torque.
|
|
Mdman352
Wed October 8, 2008 7:16am
|
new motor
This is a FE medium riser motor stroked to 454 with a hydraulic roller cam. Dyno results are 470 HP and 564 Ft of torque.
|
|
greg schroeder
Sun October 12, 2008 1:04pm
|
Half shaft Superformance broken
This Superformance half shaft from Ford 8.8 rear end car 2040 was broken from standing start on drag radials. The rear end was replaced with Detroit Tru-trac and the half shafts were replaced with stronger from The Driveshaft shop.
|
|
gjkrv8
Tue October 14, 2008 8:50pm
|
Broken_Temp_sensor_thread_adapter
This little bugger gave me heart failure. it borke off in the block. Had to use an "easyoout" to get it out. Though I might have had to take the whole engine out.
|
|
Rick Yeager
Thu October 23, 2008 12:02am
Rating: 10
|
3_Dad
Dad, on the right. He was about 79 when he rebuilt this engine. It was the last one he ever rebuilt
|
|
