CSX 4039
Sun April 25, 2004 11:02am
Rating: 10
|
New Porsche
Supposedly this is real and not doctored. 
|
|
Randy Rosenberg
Sun April 25, 2004 2:09pm
Rating: 9
|
Trigo/Goodyear FRONT.
Please note the hand painted Goodyear Eagle lettering.
|
|
Bruce Edwards
Thu May 6, 2004 3:53pm
Rating: 10
|
Bill's 351W front 2
Another picture of Bill's 351W (TampaFla) for his 289 ERA.
Somethings you do not see but that I will post when I get more time.
Forged Keith Black pistons .30, Double row timing set, .10/.10 crank, Hand fit Sealed Power 1/16 moly rings, trimetal Clevite 77 bearings, HP/HV Melling pump with a HD drive, Edelbrock Performer RPM cam, Roller tip rockers, Brass freeze plugs, Windage tray, Oil pan baffle welded into bottom of pan, Oil temp bung brazed to side of pan, High Rev anti pump up lifters, ARP Studs for mains,ARP rod bolts, modified oil pick up, treaded front oil galley plugs, matched block oil passage to oil pump and FelPro gaskets
|
|
nanard289
Tue May 18, 2004 4:10am
Rating: 10
|
special oil pump
As it is not easy to fill the rear end or the gear box, you have to provide a special pump to do it.
IMPORTANT RECOMMENDATION:
After use, don't put it in your kitchen, there is a familly conflict risk
|
|
nanard289
Tue May 18, 2004 4:20am
Rating: 10
|
OIL THERMOSTAT
Too hot oil is not good for your engine as well as too cold oil. This thermostat will regulate according to oil the temperature the oil flow going to the radiator.
|
|
LwCwb
Mon May 24, 2004 12:12pm
Rating: 10
|
CSX3252
Plaque says:
Orginal Shelby Cobra CSX3252
Sold in 1967, This is an example of an unmolested street car. Estimated value: $375,000. This in not a shelby kit car!
|
|
Brent Mills
Sat May 29, 2004 6:24pm
Rating: 10
|
Kirkham KMP286
Polishing the stripes...Still not done.
|
|
Brent Mills
Sun May 30, 2004 10:03am
Rating: 10
|
Progress being made on polishing....
Looks easy...It's NOT!!!! To get to this point it took me approximately 40 hours. To get all the deep marks out, it requires a lot of sanding, and of course once you start polishing, you'll end up sanding again, because you'll notice all the stuff you missed. Frustrating to say the least.
|
|
NMattison
Wed June 9, 2004 8:16am
|
think we like bright colors
the pt is not ours, mother-in-laws. i tell her everyday it ugly!
|
|
westcott cobra
Fri July 23, 2004 12:27am
Rating: 9.5
|
Crendon Cobra Front iso
16 " wheels because 15" tires with ZR speed index are not availlable in Germany.
|
|
Secret Squirrel
Fri July 23, 2004 4:15pm
Rating: 10
|
That's Not Demi Moore?!
My wife, Maura in the Cobra Demi Moore drove in Charlies Angels Full Throttle. Leg room was very limited due to modification of pedals for Demi. It's not a BDR. 4/18/2004 @ California Cobra.
|
|
wilf leek
Sun July 25, 2004 9:01am
Rating: 10
|
A fine a$$
I never tire of this view. I hope that does not say anything untoward about me!
|
|
BevanWright
Tue July 27, 2004 3:53pm
|
Brake_Duct_Template
This template can be used to make a brake duct for the front brakes. It fits in behind the oval openings on the front of the car.
You will notice that a bit isnt shown (unfortunately the scanner only does A4 standard page size. You can finish by folding the image in half and tracing the other side.
You may also wish to add tags to mount to the body.
|
|
acendo
Wed July 28, 2004 6:21pm
Rating: 10
|
Our Ultima GTR
Not a Cobra, but still pretty sweet!
We also are selling these cars Turnkey or Turnkey Minus... Just thought I'd share.
|
|
Zderf
Sun August 1, 2004 10:27am
Rating: 10
|
$2.5 Million Home, Cobras and Ferraris
6 multi-million dollars homes, with an easy $5 million dollars in cars parked out front. Wow... not my neighboorhood.
|
|
