 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
1 |
2 |
3 |
4 |
5 |
6 |
| 7 |
8 |
9 |
10 |
11 |
12 |
13 |
| 14 |
15 |
16 |
17 |
18 |
19 |
20 |
| 21 |
22 |
23 |
24 |
25 |
26 |
27 |
| 28 |
29 |
30 |
31 |
|
|
|
|
|
CC Advertisers
|
|
simon clemens
Sun August 1, 2004 7:17am
|
LHS_extractor_area
Some metalic spagetti will have to fit inbetween the head & quad flange gap.
Lots more time & centre line measurements for equal length esxtractors!
|
|
Secret Squirrel
Wed October 20, 2004 7:00am
Rating: 10
|
Rocker Arms Close Up
Close up of Edelbrock Performer RPM Aluminium Head with Roller Rocker Arms & RPM Air Gap Intake Manifold. 10/16/2004
|
|
Michael C Henry
Sat January 15, 2005 4:11pm
Rating: 10
|
Notice the even gap between the rear edge of windsheild frame and front edg
I made longer lower hinge brackets to keep windwing from being broken when it is bumped inward against the windsheild frame
|
|
Michael C Henry
Sun January 16, 2005 5:54pm
Rating: 10
|
windwing lower bracket even gap wing to frame
This is the longer lower hinge bracket I made.It moves the wing to a position where the edges meet evenly. It will fold flat for clearence in the garage. The way it used to be The wing hit at a point and any force would break the windwing.
|
|
jeffko
Sun February 20, 2005 5:26am
Rating: 10
|
Starting to look like an engine!
Got the AFR 205s and port matched them to the Air Gap intake. Magnum rockers and pushroods feed by a Demon 750.
|
|
DealsGapCobra
Wed May 18, 2005 7:42pm
Rating: 10
|
|
Robert Sobers
Wed November 9, 2005 10:31am
|
Shelby R Model Clone
My 66 Shelby R Clone Specs.
D.S.S. Pro Bullet 306/308 Short Block Level 10 CNC
Rods: Forgings, shot-peened, Magna Fluxed, CNC Diamond resized and fitted with ARP Wave Loc rod bolts. Balanced to racing tolerances.
Crank: Production crankshaft, thermal cleaned, shot-peened, Magna Fluxed, precision ground, oil scooped and chamfered and balanced to racing tolerances.
Pistons: DSS PRO-LITE Forged 2 valve relief flat top, CNC fly-cut for most aftermarket race cams and heads. Balanced to racing tolerances.
Rings: Sealed Power/ Speed-Pro Moly rings.
Bearings: Tri-metal rod and main bearings.
Block: 5.0 roller cam block, thermal cleaned, stress relieved, Magna Fluxed, threads chased, mains checked and corrected, oil galleys tapped for thread in plugs and the decks are CBN squared and equalized.
Transmission- C4 Automatic
Rear End- 8 Inch Detroit Locker 355 Gears.
Gt40Y Heads ported and polished.
Comp Cam by Bennett Racing Cams.
Edelbrock Air Gap Manifold
670 Holley Street Avenger Carb.
1.6 Roller Rockers
MSD Distributor
MDS 6AL Ignition Control Unit
Edelbrock Fuel Pump
Edelbrock Water Pump
AFCO Aluminum Radiator
Canton 7 QT. Oil Pan
Windage Tray
Shelby R Valve Covers with Vent Stacks
Holley Electric Fuel Pump
3/8 Stainless Fuel Line Tank to Pump
Spal Electric Fan
3 ¾ Auto-Meter Tach
Raptor LED Shift Light
Hurst Quarter Shifter with Line-Lock
K&N X-Stream Air Cleaner
Trunk Mounted Battery with Cut Off Switch
PA Performance 3-G Alt.
PA Performance Mini-Starter
Total Control Products Strut Tower Brace System
Total Control Products Sub-Frame Connectors
Auto-Power Roll Bar
Simpson Safety Harness
Hunsaker Racing Seats
Mac Headers
Mac Exhaust System with 2 ½ Inch Dumps.
R-Model Gauge Panel with 2 5/8 Autometer Gauges.
Cobra Country Oil Breather System.
|
|
boxhead
Sun June 18, 2006 4:36am
Rating: 10
|
P1000474
I think this is an old Ford Anglia roadster, It has the left hand door welded closed and body filler in the gaps, Also the rear arches have been moulded to the body and some big flares fitted aswell.
The front of the chassis has what appears to be box section steel welded in place.
I am taking a guess that this is possably an ex speedway car or home made rod of some sort.
Now I have to decide if I want to drag it out and get it home, might look good in the garden?
|
|
tbirdz12
Thu July 13, 2006 7:02pm
|
75 Ford Maverick Sleeper Project
331 DSS Short Block, CNC'd AFR 165's, RPM Air Gap, Holley 600, Hooker Super Comps, 10.3:1 Comp,
XE274HR12, Shift Kit, 3.80 8" with Detriot Locker, P195R14's
400+ Hp/400Tq estimated
|
|
JAC
Wed July 11, 2007 6:05pm
|
pipes
measured floor to flange both sides the same.
front of frame to flange-same,
outer edge of frame to flange-same.
both side pipes level and parallel to frame and floor. Gap at rear of driver side flange.
|
|
Manowar
Fri August 3, 2007 5:20am
|
Man OWar 427, Edelbrock Air Gap & Quads-perfect for Cobras
|
|
iwantacobra427
Thu March 20, 2008 7:20pm
|
|
Duffinatur
Sun June 22, 2008 11:44pm
|
How_to_repair_split_panel.jpg
Spread apart the gap w/ a screwdriver, drizzle in some mixed resin and a few fibers, clamp overnight, sand accordingly, test for adhesion.
|
|
iwantacobra427
Tue December 9, 2008 7:17pm
Rating: 10
|
331, AFR, Holley, Air Gap, MSD, K&N
|
|
Baz
Fri May 8, 2009 12:23am
|
Gaps_filled_and_body_rubbed_back_smooth_Small_
|
|
|
All times are GMT -7. The time now is 11:59 AM.
Links monetized by VigLink |
