52chevyred
Fri January 1, 2010 7:32am
|
Replacement Rollbar Mounts
Here, Kurt the builder, had to make new mounts to "correct" Street Beasts "mistake"
|
|
52chevyred
Fri January 1, 2010 7:49am
|
Street Beasts Headers
Here is a set of headers I had to get from Street Beasts. It only took FIVE MONTHS to get them. I live in the sticks with no "custom header" manufacturers around. I bought and tried Factory Five headers earlier, but they won't work with this body.
|
|
52chevyred
Fri January 1, 2010 7:50am
|
Street Beasts Driver Sidepipe
Here is the Street Beasts sidepipe on the driver side. Another lesson learned: if you use a 351W for mock up and are installing a 302, THERE IS A DIFFERENCE! The 302 is 2" narrower (at the head) and about 1" lower (at the head) than the 351. We had to "adjust" the motor mounts when I put the dummy 302 in.
|
|
*13*
Sun January 3, 2010 8:38pm
Rating: 10
|
289 FIA ( I stole the photo from another site)
Such a great Shot I had to save it here
|
|
Z-linkCobra
Fri January 22, 2010 7:29am
|
rear suspension
Had the body off so I figure would take a pic of the rear set up complete.
|
|
cameron02
Thu April 1, 2010 4:45pm
|
almost finished
Had to make an adaptor for the throttle body so I could close the bonnet
|
|
Badvnm
Mon April 26, 2010 12:31pm
|
The First Ride
I had to take the Cobra out for a test drive on my birthday
|
|
Badvnm
Mon April 26, 2010 12:44pm
|
My Dream Car
The very beautiful Model (Taylor) had come over to pose for me.. Thank you
|
|
Z-linkCobra
Mon April 26, 2010 2:36pm
|
Radiator mounted too!!
Got that done this weekend too. Well it was done but after I got the hood done and had a good freind come over and take a look...I decided to move it a little...Thanks for the input Russ.
|
|
52chevyred
Mon May 3, 2010 3:35pm
|
Street Beasts Trunk Surgery
Had to do some major surgery in the trunk to drop the body almost 2". It looks ugly, but paint and carpet will cover it up.
|
|
Excaliber
Tue May 4, 2010 12:08pm
Rating: 7.5
|
TKO-2
New clutch release arm had to be drilled out
|
|
Wbulk
Wed May 5, 2010 11:15am
Rating: 10
|
Modifed Suspension on a B and B with Modified Upper Mount and Longer Shock
One option for some cars starting around vin 411 that may have had a design problem. The lower A Arm mount was moved up and new higher shock mount was made. This corrected bump steer and roll center flaws. It also gave the suspension a greater travel. Instructions available upon request.
|
|
Cobra 29
Wed August 4, 2010 5:29pm
Rating: 9
|
Proper spark plug wire routing
The new FMS FE valve covers had a tab for spark plug wire holder. I had to use to get that "old school" look.
|
|
fastraxsg
Mon October 4, 2010 7:26pm
|
motor mounts
Had a serious problem with ground clearance so raised the motor up in the chassis and a tab forward to clear local monster speed bumps and deep potholes.
|
|
lamaluv
Fri October 29, 2010 6:53pm
Rating: 10
|
P1040476_opt
The Dove aluminum block 427 that Gail had put in ERA EXP 002
|
|
