Tongue Pirate
Fri March 3, 2006 7:05pm
Rating: 10
|
|
Eljaro
Sat April 1, 2006 10:09am
Rating: 9
|
broken pushrod in 427 C/O
|
|
Eljaro
Sat April 1, 2006 10:18am
Rating: 9
|
modified hole in manifold
|
|
HSSS427
Wed April 19, 2006 10:05am
|
ERA #414 427 side oiler after Keith Craft rebuild
427 side-oiler - C5AE-H
Shelby American aluminum heads, stage II port and polish
Forged crank C5AE-6300
Lemans Rods
Aluminum Police Interceptor intake - C6AE-9425-E
Mighty Demon 750 carb
Diamond Pistons
MSD 6AL electronic ignition and billett distributor w MSD 8.5mm wires
Comp Cams hydraulic roller camshaft: 242 duration, .645 lift, 248 duration, .635 lift
Crane lifters, Smith Bros push rods
|
|
Dirtrich
Tue October 10, 2006 5:58pm
|
SPF 1660 "roadster"
Don't know what SPF uses for stock mufflers but they seem kinda junky and are too quiet and restrictive. I replaced them with stainless Magnaflow straight thru's and they look and sound great but are still too damn quiet. However, I figured they would be so I added stainless cutouts with electrically operated valves. It allows 3 settings so they're currently set at 10%, 30% and full open. From mild to wild with one push of the button (hidden under the dash)...AWESOME!
|
|
fastraxsg
Thu November 16, 2006 7:33am
|
radiator modification
Constantly overheated so changed to a moulded and extended CJ-7 combination. Temp stays at 180 degs even in traffic with the little 10" pusher fan on . That's in 97 deg. afternoon sun, our typical afternoon. Measured engine bay, too narrow for any modern V-8 or V-6 so have been looking at a Supra in-line six with turbo(s) to put the oomph into the drive.
|
|
RNT
Wed January 31, 2007 7:13pm
|
1966 GT Replica by Fiberfab
This is a kit car I built in 1966. VW chassis, Porsche 1600 engine. The clamshell top was opened hydraulically by pushing a button and then you slid in and hoped a semi didn't run you over.
|
|
computerworks
Fri February 23, 2007 7:28pm
Rating: 10
|
|
computerworks
Fri February 23, 2007 7:28pm
|
|
computerworks
Fri February 23, 2007 7:39pm
|
|
mtpockets
Tue March 27, 2007 10:09am
|
TCC - Austin \'07
Lunch Friday, pushing Kelly's car.
|
|
vettestr
Sun July 8, 2007 10:38am
Rating: 10
|
CSX 2169
This is 1 of 2 tops known to have been made. It was an Co. show car damaged during unloading off truck so got pushed to the side til bought by an employee and repaired. Many upgrades were added by Fred J.
|
|
MrMagoo
Sun November 25, 2007 10:10am
|
Header Spreader
A device to spread slip-on style headers using the spring brackets to push against.
|
|
MrMagoo
Sun November 25, 2007 10:10am
|
Header Spreader
A device to spread slip-on style headers using the spring brackets to push against.
|
|
MrMagoo
Sun November 25, 2007 10:10am
|
Header Spreader
A device to spread slip-on style headers using the spring brackets to push against.
|
|
