Brent Mills
Wed April 9, 2008 9:39pm
|
TIG Welding
Practicing TIG welding. Fun!
|
|
Brent Mills
Wed April 9, 2008 9:39pm
|
TIG Welding
Practicing TIG welding. Fun!
|
|
Brent Mills
Wed April 9, 2008 9:39pm
|
TIG Welding
Practicing TIG welding. Fun!
|
|
Brent Mills
Wed April 9, 2008 9:39pm
|
TIG Welding
Practicing TIG welding. Fun!
|
|
Brent Mills
Wed April 9, 2008 9:39pm
|
TIG Welding
Practicing TIG welding. Fun!
|
|
1985 CCX
Sun December 21, 2008 9:27am
|
Original 60's screens
Was lucky to find these original side mount screens. These were the type used in the 60's which differ by full winding of the screen versus tack weld to the ring and no pop snaps, they mount via SS side brackets and funky knobs.
|
|
Baz
Mon February 23, 2009 8:41pm
|
Extractors_for_nearside_bank_Small_
Just finished welding them up. They have to be painted yet. Now the fun starts making the offside extractors as this is where the steering column is.
|
|
kitcarbp
Mon April 13, 2009 6:36am
Rating: 10
|
Modified Lower Radiator Hose
Here is the modified lower hose to keep the surge tank on the LOW pressure side (water pump inlet) of the system. Not the most elegant but very functional. I found a glass filled nylon "T" taht is 1.75" and has a 1.0" fill line for the surge tank.
|
|
martrogers
Wed April 29, 2009 2:30am
|
Wiper Mechanism
Built a slider mechanism to convert the donor car wiper motor into a normal cobra push-pull assembly. The throw is adjustable to obtain the correct wiper angle.
I did this because:
1.Commodore replacement motor will be easyto get in future
2.Plugs easily into the harness giving full functionality
3.Cheap - came with the donor car!
|
|
cobrasnake
Tue August 25, 2009 9:44pm
Rating: 10
|
Club Auto Sport
Fun Owners' cars
|
|
kitcarbp
Tue September 29, 2009 7:22am
Rating: 10
|
First Start-Up Roll-Out
Here is a shot just before I started her in the drive.
It has taken me about 5 years to get to this point and boy is this fun!
|
|
Mark IV
Sun November 8, 2009 12:52pm
Rating: 10
|
|
*13*
Wed November 25, 2009 8:43pm
Rating: 10
|
289 Weber Fuel Routing
Just re-did the Fuel routing. Fun Project.
|
|
portmax
Mon December 7, 2009 8:05pm
|
1
my 1991 cardiac cobra,472 ci (460) heavy port job d0ve heads, edelbrock performer rpm cam and manifold,1 inch spacer 850 holly w a 30 cfm stub stack. jacobs ignition, new 3 inch i.d. mufflers,loud??!!!wow!!,four speed ,2.5 gears and still run an easy mid 11s on street tires. fun car astoundingly fast and stable. best recorded mpg 26.5
|
|
cobrajeff
Tue December 22, 2009 8:01am
|
289 Cobra manual trans shifter on C4
I cut up a Ford 4-speed shifter to adapt to my C4, including functional Park/Reverse lockout.
|
|
