Swanny80
Thu February 17, 2011 7:40pm
Rating: 10
|
|
ack fia
Tue March 1, 2011 1:05pm
Rating: 10
|
Engine in ERA 2039
347 Ford Motorsports block
Eagle forged crank and H beam rods
KB pistons
COMP CAM roller cam & kit
Weber 48 IDA's
Accel tach drive dist.
AVIAID pan
Centerforce clutch
|
|
pbarker
Sat March 12, 2011 7:13pm
|
|
pbarker
Sun March 13, 2011 2:29pm
Rating: 10
|
IMG_15454
347 with Webers
|
|
Full Throttle Al
Sun August 7, 2011 2:45pm
Rating: 10
|
Weber Stacks Thru Hood Scoop
|
|
nanard289
Fri December 30, 2011 1:26pm
Rating: 8
|
step 1
First step is to drill two pair of flanges (one for car side and other for head cylinder side)
|
|
nanard289
Fri December 30, 2011 1:35pm
Rating: 10
|
Building operation - second step
here I cut a 90° aluminum pipe elbow to have two small 40° elbow. This will allow to have a vertical 5° angle
|
|
nanard289
Fri December 30, 2011 1:41pm
Rating: 10
|
Step 3
A piece of wood is used as dummy to adapt the round pipe at the head cylinder flange opening
|
|
nanard289
Fri December 30, 2011 1:45pm
Rating: 10
|
Step 4
Now we have to connect carefully elbows in the flanges and to bing it to the welder
|
|
nanard289
Fri December 30, 2011 1:55pm
|
Step 5
Welding operation is completed, now we have to adjust both intake manifold ports to the head cylinder
|
|
nanard289
Fri December 30, 2011 2:03pm
Rating: 10
|
Step 6
Weber carbs need some clearances in the flange to allow free operating movements
|
|
nanard289
Fri December 30, 2011 2:23pm
Rating: 9
|
Carbs front view
In this picture, we can see the vertical angle of 5°. In this position, we have to decrease by 1mm fuel bowl level in the carbs
|
|
nanard289
Fri December 30, 2011 2:35pm
Rating: 9.75
|
Step 7
Building operations are completed. Now is the time to tune the carbs. I had previously a set of Weber 48IDF and I have change to adapt a set of 48 IDA bored at 50mm
|
|
*13*
Sat May 5, 2012 8:52am
|
Weber Jetting Database
Spreadsheet
|
|
tool time George
Tue June 5, 2012 5:48pm
Rating: 10
|
|
