Clois Harlan
Mon March 9, 2009 6:32pm
|
HCS Body side shot
Notice the outer skin of the door is still taped in place for final fitments and then the adhesive will be applied to make it one piece.
|
|
KCKingCobra
Thu April 16, 2009 11:12am
Rating: 10
|
Joe's Place
Hangin' with the guys
|
|
kitcarbp
Mon September 21, 2009 8:22am
Rating: 10
|
VDO oil temp sender for oil pan drian plug- 14mm x 1.5
This oil temp sensor threads into 460 crate engine oil pan in place of the standard drain plug.
|
|
nanard289
Fri October 9, 2009 8:42am
Rating: 10
|
Tribute to Bill from Upstate
On the old track of Reims-Gueux (France). In Jully 1965 the Cobra Daytona N°26 was the winner at this place and by the way, Carroll Shelby was World Championship in GT Class
|
|
Juggernaut
Thu December 3, 2009 11:58am
Rating: 10
|
Adair Show - 1st. Place 1961 - 1978 Modified Cars
|
|
Juggernaut
Thu December 3, 2009 11:58am
Rating: 10
|
Collinsville Show - 1st. Place - Kit Cars
|
|
Wbulk
Mon December 7, 2009 5:10pm
Rating: 10
|
Gas Filler Modification
Modification to a B and B fuel filler. It is just setting in place. The LeMans cap still has to be drilled.
|
|
kitcarbp
Fri January 22, 2010 12:19pm
Rating: 10
|
V8 oil cooler
Ford Explorer V8 oil cooler. LONG made this OEM oil cooler for the mid 90's Explorers, if I can shoe horn this into place, it just might be the cooler I was looking for to keep the 460 oil temps uniform. This is hooked up in-line with the lower rad hose. This should have very good water flow rates to cool the oil.
|
|
FUNFER2
Sat February 6, 2010 5:24am
Rating: 10
|
Polished 304 stainless steel "Gilmore" Kit. Muffler
The muffler does not have glass pack to be blown out, but rather louvers. They can be placed going forward, to quite the sound but, it hurts the torque some.
|
|
Rick 427 Cobra
Fri March 26, 2010 5:51pm
Rating: 10
|
T-5 FINAL INSTALL IN PLACE OF TOP LOADER
|
|
Dangerous Doug
Mon April 26, 2010 9:35pm
Rating: 10
|
Two to help roll it off the trailer
Tim and Doug came by to help me roll my Cobra off the trailer and into the garage. Complicated by the fact the steering column is not in place. I worked the brakes...
|
|
KarlCSX2498
Fri May 21, 2010 6:01pm
Rating: 10
|
alum body tacked in place with klecos
|
|
KarlCSX2498
Sat May 22, 2010 3:28am
Rating: 10
|
alum body tacked in place with klecos
|
|
hogster
Wed May 26, 2010 6:38am
|
|
hogster
Wed May 26, 2010 6:38am
|
sidepipe6
Outer tube in place, just need to polish
|
|
