schipps
Sat June 28, 2008 3:50am
|
Rear drivers side
How good does that look?
|
|
schipps
Sat June 28, 2008 3:50am
|
|
MrMagoo
Sun August 31, 2008 3:37pm
|
Control Arm Mount
Drivers side control arm mount fractured. This photo is after the repair.
|
|
capteddie
Thu October 30, 2008 5:05pm
|
|
Dons429AC
Tue November 4, 2008 3:08pm
Rating: 10
|
Future Race Car Drivers
Kidos after delivery
|
|
RJCCOBRA
Thu November 13, 2008 3:17pm
|
Shell Valley build
The cowl hoop & windshield are mounted, and drivers side rear wheel well sectioned for tire clearance. I don't know what jig Shell Valley used to align the interior tub to the body, but it was way off. I'll probably have pictures of the fiber glassing effort later.
|
|
gjkrv8
Fri November 21, 2008 9:37pm
|
|
RJCCOBRA
Fri December 5, 2008 2:25pm
|
Shell Valley build
Here's a picture of the brake proportioning valve and 10 lb. residual pressure valve mounted on the drivers side frame rail.
|
|
Michael J
Thu January 1, 2009 4:54pm
Rating: 10
|
CSX 2002
CSX 2002 as seen at Steamboat Springs, CO. vintage races, 1998. The first Shelby American competition car according to the placard at the front of the car. Driven by Shelby American team drivers; Krause, Gurney, Miles, Brock, McDonald.
Contact me at lightcatcher@bresnan.net for more details.
|
|
Baz
Thu January 15, 2009 12:45am
|
Hole in Dash. Missing Fuel Gauge
Fuel Gauge and Fuel Tank Sender Unit not compatible. Sent away for re-calibration. Fuel Gage showing empty when full and vice versa.
|
|
Jim Kellogg
Fri January 23, 2009 4:07pm
|
Cobra and the Deere
Garage shot of my winter drivers
|
|
kitcarbp
Tue May 12, 2009 11:21am
Rating: 10
|
West Coast Sidepipe Bracket
Here is my interpretation of how the sidepipe bracket should be mounted. This is a top view near drivers side rocker panel area
|
|
bran3b
Sat June 20, 2009 9:26pm
|
trailer hitch hit here
2002 Avalanche trailer hitch hit here
|
|
63mercury
Wed July 15, 2009 1:49pm
|
|
Pete Munroe
Wed July 22, 2009 9:58pm
Rating: 6
|
Canton oil thermostat
ERA 289 FIA with Canton oil thermostat. This is the drivers side hose run to the cooler.
Off-set the Canton thermostat cooler line outlets by taking it apart and rotating the segments. The segments can "clocked" in 90 degree increments, so the oil cooler hoses can exit on opposing sides. Made plumbing a lot easier in this installation. Fewer angles in the swivel fittings helps avoid any restriction on oil pressure.
|
|
