fkemmerer
Sun August 3, 2008 6:31pm
Rating: 10
|
ERA 753 - Engine In and Mostly Hooked Up
Here's a picture of our ERA with the egine installed and everything hooked up except for the cooling system, the alternator, and the wiring for the EFI system.
|
|
fkemmerer
Sun August 3, 2008 6:31pm
Rating: 10
|
ERA 753 - Engine In and Mostly Hooked Up
Here's a picture of our ERA with the egine installed and everything hooked up except for the cooling system, the alternator, and the wiring for the EFI system.
|
|
ByronRACE
Thu August 21, 2008 10:01am
|
Custom digital touch-screen dash.
I'm an embedded systems engineer and couldn't help taking this to the car...so it has an underdash PC based touchscreen dash running my SnEEC Datalogger for data acquisition, and I built a custom control/relay board that controls all aspects of the car as well...12 channels. A little Buck Rodgers meets Carol Shelby.
|
|
fkemmerer
Tue September 9, 2008 4:11pm
|
ERA 753 - Electrical Components
This is a picture for the auxillary control switch hidden under the dash of my ERA
|
|
fkemmerer
Tue September 9, 2008 4:11pm
Rating: 10
|
ERA 753 - Electrical Components
A pciture of the auxillary components to control and expand the FAST XFI computer in my car.
|
|
fkemmerer
Tue September 9, 2008 4:11pm
|
ERA 753 - Electrical Components
A picture of the custom mounting bracket for my MSD box and XFI computer. This allows the electrical components to be installed under the dash and removed for adjustments or service.
|
|
decooney
Sun November 9, 2008 4:25pm
Rating: 10
|
1969 428CJ numbers and oiling blueprinting
Numbers and some oil system blueprinting
|
|
RJCCOBRA
Mon December 15, 2008 2:47pm
|
Shell Valley build
Fabricating brake lines from the master cylinders to the proportioning valve.
|
|
RJCCOBRA
Mon December 15, 2008 2:47pm
|
Shell Valley build
Brake lines installed between master cylinders and proportioning valve. A cover was fabricated and installed over the brake/clutch box.
|
|
RJCCOBRA
Mon December 15, 2008 2:47pm
Rating: 1
|
Shell Valley build
Another view of the brake lines.
|
|
kitcarbp
Mon April 13, 2009 6:36am
Rating: 10
|
Modified Lower Radiator Hose
Here is the modified lower hose to keep the surge tank on the LOW pressure side (water pump inlet) of the system. Not the most elegant but very functional. I found a glass filled nylon "T" taht is 1.75" and has a 1.0" fill line for the surge tank.
|
|
Dwight
Fri May 1, 2009 6:06pm
Rating: 10
|
Cobra security system
protection for my Cobra
|
|
kitcarbp
Tue June 23, 2009 7:01am
Rating: 10
|
alternator fuse with power distribution
I upgraded my electrical system to handle my twin SPAL fans (18A x 2 = 36 AMPS) by installing a modern Alt fuse power box. I used 4 gauge cable from alt to fuse and fuse to battery. It now serves my twin fans and main harness from this point and will give me an underhood power point.
|
|
philminotti
Tue August 25, 2009 6:06pm
Rating: 10
|
|
kitcarbp
Wed September 23, 2009 9:42am
Rating: 10
|
Cooling System Pressure Test Hose Connection
I tapped into the side of my expansion tank to check for potential cooling system leaks with 10-15 psi shop air.
|
|
