Aussie Mike
Tue February 3, 2004 5:33am
|
Knock Off
Here's one of the pin drive adaprtors I got from Superformance. It came with only the Ford bolt circle on it so I dlled it to fit the Jag bolt circle as well. I machined up some billet center caps and added some self adhesive AC logos I got from finish line. Hopefully I'll have the wheels soon.
|
|
Aussie Mike
Tue February 3, 2004 5:44am
|
Moto Lita Steering wheel
I got the wheel from Finish Line as I've always liked the Moto Lita wheels. I also like the look of the larger 9 bolt boss. Unfortunately there are no 9 bolt bosses available for my suzuki steering column so I machined up my own. I turned down a SAAS 6 bolt boss and machined an adaptor to fit it. This also let me machine up a working horn button for the center of it. The self adhesive AC logo is recesed into the aluminium horn button.
|
|
Rodney
Thu February 5, 2004 10:10pm
Rating: 10
|
-10AN return fitting on 22 gallon SPF tank
-10AN fitting on the upper front edge of the 22 gallon SPF stainless tank
|
|
mj_duell
Mon February 9, 2004 4:45pm
|
|
mj_duell
Mon February 9, 2004 4:45pm
Rating: 10
|
|
speed220mph
Thu February 19, 2004 8:52am
|
M1B McLaren
Preparing to take victory lap at Waterford Hills Raceway, Michigan. Power is from Jerry Titus' T/A engine with Webers fitted.
|
|
SPF1609
Thu February 19, 2004 3:16pm
|
Tight fit
FE installed: front view, no hood
|
|
boxhead
Sun February 29, 2004 12:14am
Rating: 10
|
Front Suspension
this shows the right hand front suspension all fitted to my car, you can also see the T56 I picked up at a good price
|
|
boxhead
Sun February 29, 2004 12:20am
Rating: 10
|
L/H rear suspension & driveshaft
Here you can see the L/H rear suspension all bolted into place, next job isto make & fit the brake & fuel lines
|
|
speed220mph
Thu March 4, 2004 1:38pm
|
Soft Top for Cobra
Soft top being fitted to big Al's FF Cobra at Whitby Motors
|
|
cameron02
Thu March 4, 2004 4:06pm
|
cut_inner_skin
this pic shows where the inner skin was cut so the engine would fit. Little bit on the passenger side is for throttle body
|
|
Terry Stapley
Sat March 13, 2004 9:48pm
Rating: 9.5
|
|
Terry Stapley
Sat March 13, 2004 10:04pm
Rating: 10
|
|
Terry Stapley
Sat March 13, 2004 10:10pm
|
|
perfstan
Wed March 31, 2004 7:08am
Rating: 9
|
PSF 'Gull Wing'
Performance Standard Fabrications UK Hand MadeAlloy Gull Wing, 7.0Ltr Side Oiler, Fix & Fit PSF UK
|
|
