cobrajeff
Sun November 30, 2003 6:57am
Rating: 10
|
Door detail
Shot of door and side intrusion bars on my ERA FIA
|
|
Barnsnake
Mon December 8, 2003 9:55pm
|
One-man Body Installer
Spreader bars for solo body installation
|
|
aeroleague
Sat December 13, 2003 10:45pm
|
Engine
327 stroker Windsor.
351 block - .030 over
303Z roller cam
FM roller lifters
Aluminum Victor JR intake
Ford 400 offset turned crank - 4.387 stroke.
Eagle H beam connecting rods
J@E forged aluminum pistons- 10.5 compression.
Aluminum flywheel
MSD distributor
Edlebrock Victor Jr. heads
Comp Cams hardened push rods.
Comp CCams Magnum steel roller rockers
Comp Cams double roller timing chain.
750 cfm Speed Demon by Barry Grant.
|
|
cobrajeff
Tue December 23, 2003 1:49pm
Rating: 10
|
Comet Caliente
My "Cobraized" 1965 Comet on the track (1972). "K" motor and 9" rear out of a HiPo Mustang, Cobra Dual Quads, 1" Shelby sway bar, Disc brakes and 14" GT350 10-spokes. Lotsa fun while I was GT350 dreamin'.
|
|
cobrajeff
Mon December 29, 2003 8:23am
Rating: 10
|
ERA convertible top
Need to be a "contorsionist" to get in with the side-impact bar when the top is "up".
|
|
RedBarchetta
Mon January 12, 2004 1:16pm
Rating: 10
|
|
TimG427
Mon January 19, 2004 9:58am
Rating: 10
|
289 dash & gauges, front braced roll bar like CSX3002
|
|
NASSTY
Wed January 21, 2004 3:49am
|
Cabin
Cross bar is welded onto side uprights and glassed onto firewall - body becomes very stiff when completed
|
|
NMattison
Wed January 21, 2004 12:31pm
|
122-2246_IMG
cutting holes for roll bar
|
|
Slither
Mon January 26, 2004 10:13pm
Rating: 10
|
CS Signing Dash of CSX7036 @ Barrett-Jackson
Shelby signing CSX7036 @ Barrett-Jackson
|
|
JLC800
Tue January 27, 2004 1:27pm
|
|
speed220mph
Fri January 30, 2004 8:01pm
Rating: 10
|
|
Aussie Mike
Tue February 3, 2004 5:26am
|
Pedals
Just about finished making the brake and clutch pedals. The brake has a tilton balance bar incorporated into it and actuates two Wilwood master cylinders, The clutch is a single 3/4" wilwood master cylinder. I've still got to make the loud pedal but having the brake and clutch pedals adds a new dimension to sitting in the car and making broom broom noises.
|
|
Jahred
Wed February 11, 2004 10:13pm
Rating: 10
|
SVC
Taking the turn at Deeside...
|
|
65 Blur
Thu February 26, 2004 12:33pm
Rating: 8
|
Moss Unit in progress
Pretty simple install - note - also adding the sway bar.
|
|
