
cay5628
Sat November 14, 2009 10:27am Rating: 10
|
Side view of engine
test fitted the headers before sending out for ceramic coating
|
|

cay5628
Sat November 14, 2009 10:27am Rating: 10
|
Right Rear View
Headers are on, starter is in, primary electrical run, mesuring fuel lines, and routing for bypass regulator and return line.
|
|

Gunner
Tue November 24, 2009 9:42am
|
707 Shift Knobs - 1
2" ball shift knob with 5sp pattern, using hex jam nut.
|
|

AMiller
Thu December 3, 2009 12:07pm
|
|

NZCOBRA
Fri December 4, 2009 12:27am
|
1 7/8 headers on TFS R
HOME MADE
|
|

portmax
Mon December 7, 2009 8:05pm
|
1
my 1991 cardiac cobra,472 ci (460) heavy port job d0ve heads, edelbrock performer rpm cam and manifold,1 inch spacer 850 holly w a 30 cfm stub stack. jacobs ignition, new 3 inch i.d. mufflers,loud??!!!wow!!,four speed ,2.5 gears and still run an easy mid 11s on street tires. fun car astoundingly fast and stable. best recorded mpg 26.5
|
|

lovehamr
Wed December 9, 2009 6:21pm
|
About to head to BDR for header fitment
|
|

lovehamr
Wed December 9, 2009 6:21pm Rating: 10
|
About to head to BDR for header fitment
|
|

cobrajeff
Tue December 22, 2009 8:07am Rating: 10
|
Heat shields added
I glued 3/4" foam insulation to the floorboards, and then sealed it off with sheet aluminium.
|
|

cobrajeff
Tue December 22, 2009 8:07am Rating: 10
|
Heat shields - driver's side
|
|

cobrajeff
Tue December 22, 2009 8:07am Rating: 10
|
Heat shields - passenger side
|
|

Z-linkCobra
Thu December 31, 2009 5:43am
|
Bottom side of block
Not a very good picture as the block is in the car currently. Here you can see the 4 bolt mains.
|
|

52chevyred
Fri January 1, 2010 6:51am
|
351W with SB Headers
This is the dummy 351W with the headers from Street Beasts. Earlier, I tried Factory Five headers, but they just wouldn't work out on this body.
|
|

52chevyred
Fri January 1, 2010 6:51am
|
351W centered with headers
This is the 351W dummy located, with headers.
|
|

52chevyred
Fri January 1, 2010 6:51am
|
Street Beasts Body Gap
Here is the body gap on the driver side
|
|