1985 CCX
Sat February 3, 2007 2:45pm
Rating: 10
|
New High Flow Milodon
High flow Milodon to partner with the new Fluidyne. Machined and tapped heater ports so they can be nicely plugged. The plugs are Chromed Brass and all new mounting bolts are Stainless.
|
|
1985 CCX
Fri March 9, 2007 5:44pm
|
Stainless Steel Spinners
SS Spinners by Accurate Machine Products
|
|
Joe Z
Thu March 15, 2007 4:05pm
|
408W with AFRs
Built it myself (except the machine work)
|
|
1985 CCX
Wed March 21, 2007 5:59pm
|
Vintage Wheel with Adapter
Aluminum wheel with machined hubcentric adapter for Jaguar spindle, forged and polished spinners, center cap, and includes anti-theft option which stops spinner from coming off if wire is not used. Now, I will set out to tone down the shine a bit and change center appearance to gold as per magnesium Halibrand casting.
|
|
1985 CCX
Wed March 21, 2007 5:59pm
|
Vintage Wheel and Adapter
This wheel includes polished forged spinners, machined hubcentric adapters specific to hub, anti-theft safety option, and center cap. Very high quality parts with a great finish. Should be considered during any build or muscle car upgrades.
|
|
1985 CCX
Wed March 21, 2007 6:34pm
Rating: 10
|
Starting to install hubcentric adapters from Vintage Wheel on the CCX
My how the dust settles over and under the car during the winter. Pulled the cover back to start installation of Vintage Wheel pin drive adapters. These parts have been machined prior to shipping to fit perfectly on the Jaguar spindle. Spinners are forged / polished and include Vintage Wheels Safety:Anti-Theft option. This option will not allow spinner to come off without removal of the safety pins.
|
|
1985 CCX
Sat March 24, 2007 2:21pm
Rating: 10
|
Vintage Wheel installed
Installation of Vintage Wheel pin-drive with adapters. Perfect machined fit over the hub for improved ride and safety.
|
|
RRD
Fri April 20, 2007 6:15pm
|
Griffith 400
engine plate machined for pump in/out
|
|
KarlCSX2498
Thu July 19, 2007 4:30pm
Rating: 10
|
HPIM0715
CNC machined 6061 aluminum caliper bracket for CSX4000 Cobra. This bracket will mount a Wilwood Dynalite caliper on the original Cobra upright. this set up is 11.75 x .81 rotor size
|
|
Johan
Thu July 26, 2007 5:52am
Rating: 10
|
My father machine gunned your father...
|
|
fkemmerer
Sat September 1, 2007 8:24pm
|
Stainless Steel Hardlines for ERA 427SC
I decided to have a set of Stainless Steel hardlines made for my ERA 427 SC Cobra. They were done on a laser profiling machine/CNC bender combination. The works was done by Inline Tubing. They turned out quite nice and the copies are exact. We also hand polished them to create a nice finish.
|
|
cobradriver
Mon October 1, 2007 6:22pm
|
Cobra creates Chaos
Normie in his Green Machine at Fontana showing it doesn't pay to try keeping up!
|
|
cobrajam
Sun November 18, 2007 6:06pm
|
391 FT Steel Crank
knife edged and lightened, went from 75lbs to 65lbs, 3.78in stroke, .010/.010, machined snout and flywheel face to fit FE
|
|
cobrajam
Fri January 25, 2008 5:23am
|
Crank Choices
L->R. 63lb Regular Cast FE Crank, 75lb Steel Cross-drilled Crank, 65lb Steel 391 FT Crank machined at snout and flange to fit FE, lightened and knife-edged
|
|
TWOOD
Fri March 14, 2008 4:34pm
Rating: 10
|
door latch release linkage
View of lower end of linkage. Very much the same as drawing that Art Burtt has posted. Spring is secured to wheel well liner with a machine screw, short lenght of safety chain, a key ring. Light colored material behind the safety chain is insulating foam.
|
|
