Baz
Wed November 7, 2007 1:52pm
|
Motor_and_Gearbox_in_chassis_Small_
7.11.07 - The LS2 motor and 6L80E transmission sit in the chassis to establish the optimum positioning of the engine and gearbox mounts. It also allows the gear selector lever to be positioned on the consul as far forward as is required.
|
|
cobrajam
Sun February 10, 2008 6:44pm
|
Final assembly of Rear Jag IRS Suspension
Still awaiting for halfshaft assemblies. At shop having Japanese U-joints replaced w/ Made in USA ones. 3.73, Auburn Pro Posi, CWI 30sp stub axles, vented rotors, Wilwood parking brakes
|
|
cobrajam
Sun February 10, 2008 6:49pm
|
Final assembly of Jaguar Rear IRS
Still awaiting for halfshaft assemblies. At shop having Japanese U-joints replaced w/ Made in USA ones. 3.73, Auburn Pro Posi, CWI 30sp stub axles, finned aluminum rear cover, adapter, vented rotors, Wilwood 4 piston Dynalites
|
|
Baz
Thu April 17, 2008 8:45pm
|
Get out the hacksaw and drill.
The floor of the boot was removed today in readiness for the installation of the fuel tank. Rear lights were positioned and drilled as was the rear number plate light on the boot lid.
|
|
scales
Sun April 20, 2008 1:14am
Rating: 10
|
Car's that I've picked up over the years.(scales) April 20,2008
1965 Mustang Gt-350 Clone. - 1968 Camaro/ 350-4speed,355 12 bolt posi. - 1970 Corvette/ Convertable,454 ,4 speed,370 posi. Sidepipes. - 1973 Corvette/ T-tops, 350,Auto,355 posi. Sidepipes - 1965 mustang 2+2/ 302, auto.
|
|
OZVENOM
Mon April 28, 2008 6:34am
|
new race cobra chassis
Test the pedals and steering for position.
|
|
terry251
Sun May 4, 2008 4:46pm
|
B-17 nose turrett
The view from the bombardier/nose gun position.
|
|
"Q"
Wed June 11, 2008 10:34pm
Rating: 10
|
Loving Wife striking a pose
Cobras from South Africa
|
|
TWOOD
Mon September 1, 2008 3:51pm
|
Same bracket back to back with irregular side on frame
This position permits the irregular ear side of the bracket to fit around the shock tower and any of the holes can align with the slots in the frame.
|
|
TWOOD
Mon September 1, 2008 3:51pm
|
Possible position of bracket, irregular side to frame
|
|
TWOOD
Mon September 1, 2008 3:51pm
|
alternate possible position, rectangular side to frame
Note straight edge of bracket is in contact with the shock tower and the only one of the two holes will align with the mounting bolts.
|
|
KCKingCobra
Thu September 18, 2008 8:01am
Rating: 10
|
|
bermblaster41
Sun November 30, 2008 5:03am
|
DSC00206_Medium_
Position where collector should be
|
|
RJCCOBRA
Tue December 2, 2008 3:07pm
|
Shell Valley build
Here's the narrowed 9 inch Ford rear end with its first coat of satin black paint. The rear end has a 3.50 posi center section. And yes, those are 11 inch drum brakes. Hey, this is a budget build.
|
|
Michael J
Thu January 1, 2009 1:18pm
Rating: 10
|
CSX 3012 in the Paddock
CSX 3012 in the paddock at the Santa Barbara airport course, May 29, 1965. The younger gentleman standing next to the car is believed to be (but not positively identified as) Lother Motschenbacher, owner and driver of the car in the 1965 season. The Clarence Dixon Cheetah #33 appears in the background.
Contact me at lightcatcher@bresnan.net for more details.
|
|
