cobrajeff
Tue December 22, 2009 8:12am
Rating: 10
|
Electric Fuel Pump Inertia Cut-off Switch
Added an inertia switch to my Holley electric fuel pump
|
|
cobrajeff
Wed December 23, 2009 7:22am
|
Rear wheel
My GoodYear Gatorbacks with white lettering and blue stripes added
|
|
Z-linkCobra
Thu February 18, 2010 8:25am
|
Trunk hinge support
When I got this kit the trunk lid and hood were not attached to their frames. So before joining the two together I figured I would give the hinges something solid to bolt to...and also add some strength. The holes are 5/8 and I am making some press fit threaded collars to put in the holes for 3/8 bolts.
|
|
392cobra
Thu April 8, 2010 2:33pm
Rating: 10
|
|
52chevyred
Mon May 3, 2010 3:35pm
|
Street Beasts Inner Fenderwell Installed
Just a shot of the inner fenderwell installed: really added strength to the body. The side vent is cut out too.
|
|
Wbulk
Fri May 7, 2010 11:44am
Rating: 10
|
Ball Joint Seal Ring
This is a Fix for A Arms that use the Chrystler ball joint without a seal groove machined in. This one was from B and B. A 3/16" steel ring was added to accept the ball joint seal. It was tack tig welded on the outside edges. The rings were cut on a water jet by Kirkhams Motorsports. Barry McGill can also do the fix.
|
|
Wbulk
Sun May 9, 2010 9:03am
Rating: 10
|
Ball Joint Seal Ring
A fix for A Arms shipped without the ball joint seal groove machined in. Ring added to accept a Chrystler Ball Joint Seal. The 3/16" thick rings were cut on Kirkhams Motorsports water jet. Barry McGill can also do the fix. The bad thing was B&B sent me the wrong arms that I paid to get fixed.
|
|
krausewich
Wed May 12, 2010 6:08am
|
Adding the hood jamb tubes and supportwork.
Adding the hood jamb tubes and supportwork.
|
|
krausewich
Sat May 22, 2010 6:10am
|
Moch engine positioned aft of stock location and 'Plan B' framework added
Moch engine positioned aft of stock location and 'Plan B' framework added
|
|
KarlCSX2498
Sun May 23, 2010 4:38pm
Rating: 10
|
427 Cobra Project Car May '10
All the moving panles, hood, trunk & doors are on and fit nice. Now final details on the alum body and add bumpers & side pipe shields for inspection.
|
|
krausewich
Sun May 30, 2010 5:21am
|
Rollbar base, Differential crossmember, and IRS box added
Rollbar base, Differential crossmember, and IRS box added
|
|
krausewich
Sun May 30, 2010 5:21am
|
Rollbar base, Differential crossmember, and IRS box added
Rollbar base, Differential crossmember, and IRS box added
|
|
krausewich
Sat June 5, 2010 9:46am
|
Rear deck and trunk bracing added
|
|
krausewich
Sat June 5, 2010 9:46am
Rating: 10
|
Rear deck and trunk bracing added
|
|
krausewich
Sat June 5, 2010 9:46am
|
Rear tank and QJ bracing and supports added
|
|
