kitcarbp
Fri January 22, 2010 12:19pm
Rating: 10
|
V8 oil cooler
Ford Explorer V8 oil cooler. LONG made this OEM oil cooler for the mid 90's Explorers, if I can shoe horn this into place, it just might be the cooler I was looking for to keep the 460 oil temps uniform. This is hooked up in-line with the lower rad hose. This should have very good water flow rates to cool the oil.
|
|
FUNFER2
Sat February 6, 2010 5:24am
Rating: 10
|
Polished 304 stainless steel "Gilmore" Kit. Muffler
The muffler does not have glass pack to be blown out, but rather louvers. They can be placed going forward, to quite the sound but, it hurts the torque some.
|
|
cameron02
Thu April 1, 2010 4:49pm
|
almost finished
Plenim, and throttle body adaptor have been HPC coated as has the intake tube (not visable in this pic)
|
|
Z-linkCobra
Mon April 26, 2010 2:36pm
|
Finally done!!
I feel like I have turned a corner with getting the hood and trunk hinged and functional. I still cant see the light...but at least I can see the next corner.
|
|
jcraigau
Wed April 28, 2010 6:58am
|
Chassis Dolly
For now these mag wheels will have to do...
|
|
52chevyred
Mon May 3, 2010 3:35pm
Rating: 1
|
Street Beasts Trunk Surgery
This is a wide view. I have heard of folks "cutting the trunk", now I'm a club member.
|
|
Wbulk
Wed May 5, 2010 11:15am
Rating: 10
|
Modifed Suspension on a B and B with Modified Upper Mount and Longer Shock
One option for some cars starting around vin 411 that may have had a design problem. The lower A Arm mount was moved up and new higher shock mount was made. This corrected bump steer and roll center flaws. It also gave the suspension a greater travel. Instructions available upon request.
|
|
Wbulk
Sat May 15, 2010 6:40am
Rating: 10
|
Full Roll Bar Home Built
2", .120 wall tubing designed to be chromed. You have to allow for chrome thickness where the tubes slid together. A lot more work than I thought. $175 invested so far. Bending and chrome brought the cost up to about $400.
|
|
hogster
Sat June 5, 2010 3:02am
|
Stainless welding
Used the Henrob Oxy/Acetylene torch to have a go at 316 stainless. Not a bad effort for second try.
|
|
SunDude
Wed August 11, 2010 5:01pm
|
SunDude's SPF engine bay: After
This is how my engine bay looks now that I have added some nice dress-up parts: black crackle-finish Cobra air cleaner with K&M filter element, 427 Cobra valve covers, a proper expansion tank, and new plug wires and distributor.
|
|
SunDude
Thu August 12, 2010 10:20am
Rating: 10
|
SunDude's SPF engine bay: after
This is how my engine bay looks now that I have added some nice dress-up parts: black crackle-finish Cobra air cleaner with K&M filter element, 427 Cobra valve covers, a proper expansion tank, and new plug wires and distributor.
|
|
Wbulk
Sat August 14, 2010 10:34am
|
Trunk Latch Modification on a B and B
This made it so I did not have to grind out the lip of the trunk for the latch finger, and by moving the latch down the license plate will now fit. I will add a rubber cushion to the trunk stop.
|
|
Bob In Ct
Mon October 4, 2010 6:12am
Rating: 10
|
Fall 2010 Connecticut
At the new vintage location in North Haven
|
|
jbcobra67
Mon October 4, 2010 11:55am
Rating: 10
|
Headed for Inspection Rejection
Yes in Louisiana you have to get a rejection before you get your tag, title and registration.
|
|
52chevyred
Fri April 29, 2011 10:48am
|
52chevyred and Bruce Bunn at Jodeco Auto Body
Delivered my Cobra to Bruce Bunn at Jodeco Auto Body. A lot of Club Cobra members have had a car painted by Bruce. I'm glad to join that "club". My car will be Speedway Blue Metallic (the bright blue on Toyota Tacoma Trucks (PPG P81) with white stripes
|
|
