Bruce Edwards
Fri January 23, 2004 5:28pm
|
427 Holman & Moody in 2nd car
Well here is the roller for the 2nd car we built. It has a fresh 427 Holman and Moody, that I warmed over to push 500hp + and over 7,000 rpm. Lemans rods & crank, medium riser heads twin Holleys and so on, scatter proof bell, our custom fuel tank,(The one Everett stole from us, can you believe they asked me how I solved the vent problem? Lot of nerve), a set of custom headers by us, 4 wheel disc and gas shocks. Can you say go FAST?
|
|
Bruce Edwards
Fri January 23, 2004 5:32pm
Rating: 10
|
427 Roller
Another shot of the 427 car. Ever wonder why the early cars run hot? The rad was set back at the top and the air would run straight over the top and not through the rad. Guess what happens if you lean it forward?
|
|
Bruce Edwards
Fri January 23, 2004 5:35pm
|
427 Done
Well here she is in all her glory. 427 sideoiler, 4 speed, Powersteering, heat and fresh air system, 4 speaker sound, trac-loc 9 inch rear and on and on. This baby would do 75mph in FIRST GEAR!!
|
|
Bruce Edwards
Fri January 23, 2004 5:38pm
Rating: 10
|
A pair of Gemini Cobras
We took the cars to a show in Daytona with the owner of the second car. As it turned out it was a Chey dealer and Surprize a Chevy won the prize! Kind of funny since everyone said we had the nicest cars at the show. Oh well we got a lot of prizes with our 302 before we let her go.
|
|
Bruce Edwards
Fri January 23, 2004 5:48pm
|
Happy customer
Here is Dave with his Black Cobra. It has "Ghost" gray stripes, (you can only see them if you look straight at the car) gray interior, 4 speaker sound, 351W warmed up to 400hp , AC, Powersteering, 5 speed, posi, Granda front brakes and does, are you ready? 75mph at 1250rpm with the AC on in 5th.
|
|
Bruce Edwards
Fri January 23, 2004 5:50pm
|
Black Cobra
A side shot of Daves car. Yes that is a Corvair van in the back ground. We restore cars as well as build them.
|
|
Bruce Edwards
Fri January 23, 2004 5:52pm
|
Daves Car finish up
A shot of me and one of the guys finishing up the car for Dave. If you look close you can just see the stripe. To bad we can not get that car to shine!
|
|
Bruce Edwards
Fri January 23, 2004 5:56pm
|
Finish up
One more check under the car before delivery. See the struts that hold up the hood and trunk? We have been doing that for years. Why use a steel rod and have to lift it when it will open by it's self?
|
|
Bruce Edwards
Sat January 24, 2004 3:52pm
|
4.6 Rear suspension
This is a shot of Corvette style rear suspension on our 4.6 Supercharged car.
|
|
Bruce Edwards
Mon January 26, 2004 3:42pm
|
4.6 Supercharged with hood up
Here is a picture of our Demo car in the shop with the hood up. You can see the custome made ram air seal and AC vents on dash.
|
|
Bruce Edwards
Mon January 26, 2004 3:45pm
|
4.6 Dash from rear
Another shot of the dash form the rear of the car. You can see the custom console we made up as well as the CD player and two front speakers in the side panels. The rear speakers are behind the seats. Carpet still needs to be edged.
|
|
Bruce Edwards
Mon January 26, 2004 3:48pm
|
Hood seal
A picture of the hood seal and scoop opening modification.
|
|
Bruce Edwards
Mon January 26, 2004 3:51pm
|
Front of car with hood up
The Demo car in the shop with the hood up. You can see the AC condensor that we fit to the car.
|
|
Bruce Edwards
Mon January 26, 2004 3:54pm
|
4.6 Engine bay #3
The ram air plate with air cleaner installed. Check out the steering link! Have to go over the top of the head to get to the rack. No room on the side. Boy that baby is WIDE!
|
|
Bruce Edwards
Mon January 26, 2004 4:08pm
|
4.6 Engine bay #2
The right side of the engine bay showing the ram air base palte. You can also see the steering shaft bracket and bearing as well as the heater hose hook up in the rear. Tight fit.
|
|
