 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
1 |
2 |
3 |
4 |
5 |
6 |
| 7 |
8 |
9 |
10 |
11 |
12 |
13 |
| 14 |
15 |
16 |
17 |
18 |
19 |
20 |
| 21 |
22 |
23 |
24 |
25 |
26 |
27 |
| 28 |
29 |
30 |
|
|
|
|
|
|
CC Advertisers
|
|
|
56 result(s) to your search. (bolts)
|
Prev Page ·
|
|
djseed
Thu March 6, 2003 5:01pm
Rating: 10
|
Eagle 6.7" Chevy Rod
Eagle 6.7" Chevy rod with 2.2" journal and 7/16" ARP bolts.
|
|
Anthony
Sat March 22, 2003 6:14am
Rating: 10
|
tunnel port fuel injection
This is a custom made mechanical fuel injection system for a 427 tunnel port. The throttle bodies are made by Tecalemit-Jackson, an English company, who made fuel injection systems for road racing. These are the 52mm throttle bodies, as compared to the 48mm. Each throttle body bolts on separately, to a weber 48IDA bolt pattern. This particular system has been modified to a hilborn style fuel metering system, a continuous flow, and doesn't have the Tecalemit-Jackson metering system. As there are no venturi's in the throttle bodies, which restrict flow, these 52mm throttle bodies shouyld flow as good as 58mm webers.
The intake is an original 427 tunnel port that has been extensively modified, I'm not sure if it was modified by someone like Holman-Moody ( a Tecalemit-Jackson dealer), or it was done in someone's garage, but it looks like it was done right.
|
|
Snakecharmer
Mon January 19, 2004 7:26pm
Rating: 10
|
427 s.o. right (psgr) galley
right side galley and cross bolts
|
|
Snakecharmer
Mon January 19, 2004 7:28pm
Rating: 10
|
427 s.o. left (drvr) galley
Left side galley and cross bolts. The left side galley is more prominent than the right
|
|
speed220mph
Tue February 10, 2004 2:24pm
|
Header Bolts Safety Wired
Header Bolts Safety Wired for positive retention
|
|
Bruce Edwards
Thu May 6, 2004 3:53pm
Rating: 10
|
Bill's 351W front 2
Another picture of Bill's 351W (TampaFla) for his 289 ERA.
Somethings you do not see but that I will post when I get more time.
Forged Keith Black pistons .30, Double row timing set, .10/.10 crank, Hand fit Sealed Power 1/16 moly rings, trimetal Clevite 77 bearings, HP/HV Melling pump with a HD drive, Edelbrock Performer RPM cam, Roller tip rockers, Brass freeze plugs, Windage tray, Oil pan baffle welded into bottom of pan, Oil temp bung brazed to side of pan, High Rev anti pump up lifters, ARP Studs for mains,ARP rod bolts, modified oil pick up, treaded front oil galley plugs, matched block oil passage to oil pump and FelPro gaskets
|
|
Pete Munroe
Thu October 21, 2004 12:59am
Rating: 10
|
ERA 289 FIA #2027
Moved shifter to the "forward" position in the TKO housing. This is about same location as top-loader shift would be. Patch gives you an idea how far back shifter was before. Shifter is a piece from Mike Forte's shop. The doublers on the floor are for the seat mounting bolts.
|
|
Secret Squirrel
Fri November 5, 2004 7:32am
Rating: 10
|
Backdraft Headers
Backdraft headers with ceramic coating and ARP SS header bolts. Before installation. 11/4/2004
|
|
Secret Squirrel
Fri November 12, 2004 8:15am
Rating: 10
|
Valve Covers & Radiator Hoses
Polished Ford Racing Valve Covers, ARP SS V/C bolts, PCV, V/C Breather, spark plug wire looms & radiator hoses installed, 11/7/2004.
|
|
Secret Squirrel
Tue November 16, 2004 12:46pm
Rating: 10
|
Holley Caburetor & Braided Lines
Holley Street Avenger 770cfm, ARP SS stud bolts, Spectre Dual feed fuel log w/pressure gauge, SS braided lines w/fuel filter, PCV and power brake booster lines and speedometer cable installed, 11/12/2004.
|
|
Secret Squirrel
Tue December 21, 2004 8:02am
Rating: 10
|
Rear Wheel Well
Checked all nuts and bolts in rear wheel well area for tightness & check rear dust plate for clearance against rotor prior to road test, 12/18/2004.
|
|
|
All times are GMT -7. The time now is 12:23 AM.
Links monetized by VigLink |
