52chevyred
Sun May 18, 2014 4:34pm
Rating: 10
|
4" Pipe installed
This is the height of the 4" pipe, as installed. You may consider 5" or 6" pipe, which would require less cutting of the body. Using larger pipe will affect the other dimensions.
|
|
52chevyred
Sun May 18, 2014 4:34pm
Rating: 10
|
Door Side Plate
This is the "Door Side" plate. It is 3 1/4" from the weld of the pipe to the end.
|
|
52chevyred
Sun May 18, 2014 4:34pm
Rating: 10
|
Front of Hinge cut at 3/4"
Here is where the "original hinge" is cut, 3/4" inch, after the hinge pin. This is on the "front side", before the pipe is installed.
|
|
52chevyred
Sun May 18, 2014 5:43pm
Rating: 10
|
Fiberglass Cut for Hinge
OK, this may be a little more fiberglass than you are willing to cut. I don't know how much would be cut with the "Original" SB hinge. I have not had any problems on my doors. This picture is not my door, but a similar one.
|
|
52chevyred
Sun May 18, 2014 5:43pm
Rating: 10
|
Modified Hinge with Pipe Installed in Open Position
This is how it will look in the Open position.
|
|
RedSnake351
Sun June 1, 2014 1:23pm
Rating: 9
|
The Coffee and Donut Gang
Saturday monthly MIRNA meet in Cary, IL This was the first one we attended but next one will try for more members to attend.
|
|
Biruta619
Thu June 12, 2014 2:38pm
|
Engine Bay
This is a 427 Shelby aluminum block stroked to a 496 fuel injected.
HP @ the wheels is 690 & 625 torque @ 4800 rpm's
|
|
Biruta619
Thu June 12, 2014 2:38pm
|
Engine Bay
This is a 427 Shelby aluminum block stroked to a 496 fuel injected.
|
|
Biruta619
Thu June 12, 2014 2:38pm
|
Car
Specifications of this engine will be posted soon!
HP @ the wheels is 690 & 625 torque @ 4800 rpm's.
|
|
Biruta619
Thu June 12, 2014 2:38pm
Rating: 10
|
Car
Specifications of this engine will be posted soon!
HP @ the wheels is 690 & 625 torque @ 4800 rpm's.
|
|
Biruta619
Thu June 12, 2014 2:38pm
Rating: 10
|
Trophy
This picture shows the car at the Coronado Speed Festival.
|
|
PSYCHO
Wed June 18, 2014 2:36am
|
IMG_04561
oops this support is in the way of the starter motor need to cut this out
|
|
Wisconsin_Snake
Thu July 17, 2014 1:12pm
Rating: 10
|
|
*13*
Wed July 23, 2014 4:16pm
Rating: 10
|
Love this FIA look
Superformance?
|
|
52chevyred
Sun August 3, 2014 4:15pm
|
Retro Racer for 2014
After showing my Cobra "plain" for the past two years, I decided to make it a "Retro Racer". I bought the decals from Finish Line Accessories. I chose the number 21, for my favorite NASCAR driver, Cale Yarborough, in 1968. I have had a lot of fun at car shows this year.
|
|
