oldmachdriver
Sun January 29, 2006 8:08am
Rating: 10
|
My old 1969 Mach1 (Aztec Aqua)
|
|
Dirtrich
Tue February 21, 2006 7:43pm
Rating: 10
|
SPF 1660 "roadster"
351/418 Stroker 505hp build sheet...
• Blue printed machined 351W version Early Casting Block ('69) with Block Girdle Installed
• Scat Forged Steel 4.100 Stroke Crankshaft
• H Beam Rods 6.200" - ARP HD Rod Bolts
• Power Forged 10.5 to 1 Flat Top HP Pistons
• J & E Chrome Moly Ring Set
• Heavy Duty Double Roller Dynagear Timing Set
• Comp Cams Hydraulic Roller Retrofit Camshaft
• Clevite H series Racing Bearings
• Polished Edelbrock Victor Jr. cylinder heads
• Chrome Moly Hardened pushrods
• High Intensity Scorpion True Roller Rockers
• Melling HV Oil pump with Hardened FMS Drive Rod.
• Complete Fel-pro Gasket set
• Heavy Duty Harmonic Balancer
• New SFI Approved 10.5 inch Standard Flywheel
• Aluminum Timing cover
• Aluminum Finned Ford Racing Valve Covers
• New Fuel Lines and Gas Filter
• Polished Edelbrock Vic Jr. Single Plane
• Edelbrock 800 cfm 4 barrel w/ electric choke
• Elec Accel Billet Distributor & high voltage Coil
• High Flow Polished Aluminum Water & Fuel Pump
• Champion Spark plugs w/ 8mm ACCEL Spiral Wires
• New Chrome Thermostat Housing
• Oval aluminum finned air cleaner w/ Cobra logo
• Chrome 100 amp. Alternator and Polished Brackets
• March Pulley Setup with Serpentine-Belt
|
|
Slither
Mon April 17, 2006 8:24pm
Rating: 10
|
|
JCoop
Wed May 3, 2006 4:29pm
|
|
cindrrrr
Sun May 7, 2006 9:11pm
|
|
blueovalfanatic
Tue September 5, 2006 1:06pm
Rating: 10
|
Heads
CC'ing the heads just to get an idea of where I stand compression-wise. Heads are C6AE-R's. The block and heads will soon be going to the machine shop.
|
|
fastraxsg
Mon October 2, 2006 8:35am
|
Penang_Malaysia_1994
Last Castrol International MX in Malaysia, Dec. 1994. Finished 2nd in the Open Trail Class. Honda XR 250 with big bore kit, Ohlins front and rear, Al Baker frame and Al Baker flowed head. Sweet mud machine.
|
|
trularin
Mon October 16, 2006 2:12pm
Rating: 10
|
|
Anthony
Sat January 27, 2007 5:33pm
Rating: 10
|
70 Mach 1 428 SCJ
1970 Mach 1 "R" code 428 SCJ 4 speed.
Original color, medium blue metallic. 1 of about 850 428 SCJ's built that year (Both Q and R codes). I'm guessing about 1/2 4 speeds, other C6 auto's. My car has the 3.91 traction loc rear. Picture taken about 1991.
|
|
1985 CCX
Sat February 3, 2007 2:45pm
Rating: 10
|
New High Flow Milodon
High flow Milodon to partner with the new Fluidyne. Machined and tapped heater ports so they can be nicely plugged. The plugs are Chromed Brass and all new mounting bolts are Stainless.
|
|
Anthony
Mon February 19, 2007 7:07pm
Rating: 10
|
Marti Report
Marti Report for my Mach 1. Lists various facts about the options and production of the car. What I find interesting is that the car sat on the dealer's lot from 9/69 to 5/70 when it was sold. I would have thought that this car, with these options, would have sold sooner.
|
|
1985 CCX
Fri March 9, 2007 5:44pm
|
Stainless Steel Spinners
SS Spinners by Accurate Machine Products
|
|
Joe Z
Thu March 15, 2007 4:05pm
|
408W with AFRs
Built it myself (except the machine work)
|
|
1985 CCX
Wed March 21, 2007 5:59pm
|
Vintage Wheel with Adapter
Aluminum wheel with machined hubcentric adapter for Jaguar spindle, forged and polished spinners, center cap, and includes anti-theft option which stops spinner from coming off if wire is not used. Now, I will set out to tone down the shine a bit and change center appearance to gold as per magnesium Halibrand casting.
|
|
1985 CCX
Wed March 21, 2007 5:59pm
|
Vintage Wheel and Adapter
This wheel includes polished forged spinners, machined hubcentric adapters specific to hub, anti-theft safety option, and center cap. Very high quality parts with a great finish. Should be considered during any build or muscle car upgrades.
|
|
