rdc767
Thu April 8, 2010 8:42am
|
nose lower insert
nose lower insert
|
|
Wbulk
Tue April 13, 2010 5:37pm
Rating: 10
|
Modified B and B Suspension Mounts
This was to correct a defect on some cars sold in 2009. The lower tubes were raised to the proper position in the picture. The upper mounts were redesigned and raised to accept a longer shock. This corrected bump steer, roll center and shock travel issues.
|
|
cobbindale
Thu April 22, 2010 1:30am
Rating: 10
|
Down Low-Down under
Snakes eye view
|
|
jcraigau
Mon April 26, 2010 4:07am
|
Ride Height
Might need to be lowered - 27.5 inches
|
|
52chevyred
Mon May 3, 2010 3:35pm
|
Back from Surgery
It sits a good two inches lower in the rear, after surgery. Coil-overs will drop it more
|
|
52chevyred
Mon May 3, 2010 3:35pm
|
Driver Side Lower View
The stance is beginning to get better after cutting the trunk.
|
|
Wbulk
Wed May 5, 2010 11:15am
Rating: 10
|
Modifed Suspension on a B and B with Modified Upper Mount and Longer Shock
One option for some cars starting around vin 411 that may have had a design problem. The lower A Arm mount was moved up and new higher shock mount was made. This corrected bump steer and roll center flaws. It also gave the suspension a greater travel. Instructions available upon request.
|
|
krausewich
Sat June 12, 2010 5:49am
Rating: 5.5
|
Rollpan tube now firmly fitting the lower body
|
|
Wbulk
Sun July 4, 2010 3:06pm
Rating: 10
|
Low Oil Pressure Warning Buzzer
Has a delay timer that allows you to start the engine without the buzzer sounding. If loss of pressure buzzer sounds immediately.
|
|
cobrarkc
Fri August 27, 2010 4:55am
|
Old and New lower control arms
|
|
Nigel Pearson
Tue October 12, 2010 11:18pm
|
Lower shock mount Ford IRS
|
|
Z-linkCobra
Tue November 2, 2010 7:27am
|
Front drive set up
Set up the drive mandrel and belts. Now on to routing the lower radiator hose over the top of it.
|
|
sambo
Sun January 23, 2011 6:03pm
|
Front suspension
Harrison chassis #78 with VS Holden Commodore lower arms, fabricated upper A-arms. I've fitted double adjustable QA1 shocks and springs.
|
|
jbcobra67
Fri February 25, 2011 12:22pm
Rating: 10
|
|
Jerry Clayton
Fri April 29, 2011 2:04pm
Rating: 10
|
IMG_0133_640x427_
Ford block plate showing lower required bolt holes
|
|
