speed220mph
Fri February 9, 2007 7:55am
Rating: 10
|
Smiths oil-pressure gauge with BSP adapter to AN-4 line
Finally found a BSP adapter to joint AN-4 swivel fitting to BSP threads on Smiths oil-pressure gauge.
|
|
emberglo66
Wed February 21, 2007 5:11am
|
SP02228 test fitting roll bar pre paint
|
|
1985 CCX
Sat April 7, 2007 1:12pm
Rating: 10
|
Moving in the right direction - Vintage Wheel & Billboards
Billboards Mounted on Vintage Wheel pin drive. Polished forged spinner with Vintage Wheel anti-theft fitting. This fitting also prevents spinner from coming off while in motion.
|
|
1985 CCX
Sat April 7, 2007 1:12pm
|
Vintage Wheel with billboards
Spring is near and this project needs to move forward. Vintage Wheel with forged and polished spinner with optional anti-theft fittings. This adds additional safety since it prevents spinner from coming off while on the move.
|
|
westcott cobra
Sun July 29, 2007 2:32am
Rating: 10
|
351C oil support line front fitting
|
|
westcott cobra
Sun July 29, 2007 2:32am
Rating: 10
|
351C oil support line rear fitting
|
|
auscobra
Sat September 8, 2007 2:10am
|
First Engine Test Fitting
First Engine Test Fitting
|
|
double ugly
Wed September 26, 2007 5:30pm
Rating: 10
|
carbon_pipes
Side pipe ready for fitting
|
|
msinghof
Wed October 3, 2007 4:21pm
Rating: 10
|
early kmp
Oil Cooler Fittings
|
|
letsboogie351
Tue November 13, 2007 12:00am
Rating: 10
|
dashboard
Next the dash is off to have a timber centre piece shaped and polished. Dash will be covered in dark grey/charcoal leather prio to fitting timber centre
|
|
MrMagoo
Sat December 1, 2007 1:07pm
|
|
big-boss
Fri February 15, 2008 7:34am
Rating: 10
|
Feb 2008
Oil System plumbed. I used the bad boy push on hose and light weight fittings. Was the easiest and I liked the looks.
|
|
martrogers
Fri February 29, 2008 9:42pm
|
Bonnet Lip Milling Tool
The bonnet lip was variable thickness which made fitting a seal rubber difficult. This tool was lashed up by fixing a metal guide to a drill with Jubilee clips and using a milling bit. Worked very well as can be seen form the amount of fibreglass swarf.
|
|
patrickt
Fri May 16, 2008 4:33am
|
Radiator Burp Fitting
Radiator Burp Fitting
|
|
LoBelly
Sun July 13, 2008 4:48am
Rating: 10
|
Zapping new lift points
Fitting new lift points to the bottom of the Cobra
|
|
