kitcarbp
Sat November 28, 2009 6:09pm
Rating: 10
|
Mcleod steel flywheel for 460
This also shows my home made engine plate I made with a jig saw and a nice set of files. Trick was to use the old rusted one as my template and the starter bolt holes and register bore was my datum point to ensure correct starter alignment.
|
|
*13*
Sun November 29, 2009 3:49pm
Rating: 10
|
Weber Filters (Home Made)
Just a first try. SS mesh & Neoprene caps from McMaster Carr. Just wanted to see if it would work. Now that I know they do, I can clean them up a bit. Blurry picture is hiding the dirty engine compartment.
|
|
NZCOBRA
Fri December 4, 2009 12:27am
|
304 merge collectors
HOME MADE
|
|
NZCOBRA
Fri December 4, 2009 12:27am
|
1 7/8 headers on TFS R
HOME MADE
|
|
cobrajeff
Wed December 23, 2009 6:45am
|
PSE 5.0" wide FIA style "spare" rim
I mounted a 15" Goodyear collapsible spare onto a 5.0" wide rim that Phil Schmidt made for me. Then I painted a blue stripe on it, and highlighted the GoodYear lettering
|
|
52chevyred
Fri January 1, 2010 7:24am
Rating: 10
|
Kurt motor mount
Here, Kurt the builder, has made "replacement" motormounts for the ones we received in the kit
|
|
52chevyred
Fri January 1, 2010 7:49am
|
Street Beast Motor Mount "mistake"
Here is another "mistake" Street Beasts made on the motor mounts. Kurt the builder made new ones (on the right).
|
|
52chevyred
Fri January 1, 2010 7:49am
|
Street Beasts Rollbar "mistake"
Here is another "mistake" Street Beasts made in locating the rollbars. Kurt fixed it later.
|
|
52chevyred
Fri January 1, 2010 7:54am
|
Rollbar 3rd Leg Problem
Here, Street Beasts made another "mistake" on the 3rd leg bracket. Kurt the builder fixed it later
|
|
kitcarbp
Fri January 22, 2010 12:19pm
Rating: 10
|
V8 oil cooler
Ford Explorer V8 oil cooler. LONG made this OEM oil cooler for the mid 90's Explorers, if I can shoe horn this into place, it just might be the cooler I was looking for to keep the 460 oil temps uniform. This is hooked up in-line with the lower rad hose. This should have very good water flow rates to cool the oil.
|
|
alfy65
Sun March 7, 2010 6:01am
Rating: 10
|
|
Badvnm
Mon April 26, 2010 12:39pm
|
My Dream Car
No store bought Headers here mame, These were made to fit..
|
|
Wbulk
Wed May 5, 2010 11:15am
Rating: 10
|
Modifed Suspension on a B and B with Modified Upper Mount and Longer Shock
One option for some cars starting around vin 411 that may have had a design problem. The lower A Arm mount was moved up and new higher shock mount was made. This corrected bump steer and roll center flaws. It also gave the suspension a greater travel. Instructions available upon request.
|
|
Wbulk
Fri June 11, 2010 5:23pm
Rating: 10
|
Seatbelt Bracket for a V Belt
This is a bracket to attach the shoulder harness on a V belt. Made out of 1/4"X3" steel.
|
|
Wbulk
Sat August 14, 2010 10:34am
|
Trunk Latch Modification on a B and B
This made it so I did not have to grind out the lip of the trunk for the latch finger, and by moving the latch down the license plate will now fit. I will add a rubber cushion to the trunk stop.
|
|
