cobrajeff
Wed December 23, 2009 6:45am
|
|
Wbulk
Sun December 27, 2009 10:44am
Rating: 10
|
Switch Bracket for Fiberglass Dash
Design of Ignition Switch Bracket to keep the switch from turning in a fiberglass dash. The corners of this are glassed in to the back of the dash with kitty hair fiberglass filler.
|
|
Wbulk
Sun December 27, 2009 10:44am
Rating: 10
|
Switch Bracket for Fiberglass Dash
Switch Bracket to keep the switch from turning in a fiberglass dash. The square corners of the bracket are glassed in to the back of the dash with kitty hair fiberglass filler.
|
|
Z-linkCobra
Thu December 31, 2009 5:43am
|
Frame tip
This is the front right frame tip of my E.M. chassis. I am a little confused as to what the inner bracket is for.
|
|
52chevyred
Fri January 1, 2010 6:51am
|
9" Centered
Here is my 9" Strange rear finally centered. The driver control arm bracket was wrong and other brackets too. I had to go with "adjustable" control arms to get it right. It was shifting 2" to the passenger side, before we "fixed it".
|
|
52chevyred
Fri January 1, 2010 6:51am
|
9" Upper Control bracket repair
Here is the "replacement" control arm bracket tacked in.
|
|
52chevyred
Fri January 1, 2010 6:51am
|
Street Beasts Control Arm Bracket Problem
Here is one of the control arm brackets we had to cut loose and relocate
|
|
52chevyred
Fri January 1, 2010 7:24am
|
Driver Control Arm Bracket Repair
This bracket was wrong. We had to cut it loose and rework
|
|
52chevyred
Fri January 1, 2010 7:50am
|
Steering Rack Problem
Here is a steering rack problem we found: the brackets are wrong, including one being "upside down" from the factory. I guess the "quality guy" was on vacation. 
|
|
52chevyred
Fri January 1, 2010 7:50am
|
Steering Brackets Removed
Here are the "replacement" brackets
|
|
52chevyred
Fri January 1, 2010 7:54am
|
Rollbar 3rd Leg Problem
Here, Street Beasts made another "mistake" on the 3rd leg bracket. Kurt the builder fixed it later
|
|
52chevyred
Fri January 1, 2010 7:54am
|
Rollbar 3rd Leg Fixed
Here, Kurt the builder fixed the problem by relocating the bracket
|
|
Blittleton
Thu January 14, 2010 2:36pm
|
New style slave cylinder and bracket
|
|
Blittleton
Thu January 14, 2010 2:36pm
|
New style slave cylinder and bracket
|
|
Blittleton
Thu January 14, 2010 2:36pm
|
New style slave cylinder and bracket
|
|
