Baz
Thu May 21, 2009 12:40am
|
Undercoating_finally_on_after_10_weeks_Small_
|
|
HighPlainsDrifter
Mon May 25, 2009 6:46pm
Rating: 10
|
|
Nickpz1
Thu May 28, 2009 7:38pm
|
Holley/Weiand 174 Supercharger
Installed a Holley Supercharger, 750 Holley Carb, MSD Digital 6+, MDS Boost Timing Master for safety, on a Ford crate 302 with 9:1 compression, Dyno at 360 HP @ 5,800 rpm (still rising) with 360 ft lbs torque flat from 3,000 rpm up, boost stayed under 7 psi to 5,800 rpm
|
|
Nickpz1
Thu May 28, 2009 7:45pm
|
Holley/Weiand 174 Supercharger
Installed a Holley Supercharger, 750 Holley Carb, MSD Digital 6+, MDS Boost Timing Master for safety, on a Ford crate 302 with 9:1 compression, Dyno at 360 HP @ 5,800 rpm (still rising) with 360 ft lbs torque flat from 3,000 rpm up, boost stayed under 7 psi to 5,800 rpm
|
|
Hawkeye
Fri June 12, 2009 11:05am
|
Paint Shop(Extend under hood scoop)
|
|
Baz
Tue June 16, 2009 2:57am
|
Cobra_returns_to_Neils_Workshop_Small_
The body has been blocked, high filled then undercoated. 3 coats of duco were then applied followed by 2 coats of clear lacquer. The stripes were then applied and it was cut back before 3 flow coats applied. In 6 months time, the car has to be rubbed back and polished again.
|
|
kitcarbp
Tue June 23, 2009 7:01am
Rating: 10
|
alternator fuse with power distribution
I upgraded my electrical system to handle my twin SPAL fans (18A x 2 = 36 AMPS) by installing a modern Alt fuse power box. I used 4 gauge cable from alt to fuse and fuse to battery. It now serves my twin fans and main harness from this point and will give me an underhood power point.
|
|
Seagull81
Sun August 23, 2009 2:33pm
Rating: 10
|
My Garage
Larua's '92 Fox is under the Cobra.
|
|
martrogers
Fri October 2, 2009 11:59pm
|
ac4
Logo in position, just need to remove tape and fix from the underside (which means taking out radiator, draining down etc)
|
|
fkemmerer
Thu October 8, 2009 10:31pm
|
Oil Thermostat - Top down under the hood
Completed installation of a Canton Oil Thermostat on an ERA 427SC showing lines and mounting location.
|
|
Z-linkCobra
Mon October 19, 2009 1:58pm
|
Build pics
Cant see it but the tank goes in from the top. No straps under the tank...clean look.
|
|
cobramatt
Fri November 13, 2009 9:13am
|
Full frame built under car (no more unibody) as well as two torque boxes
|
|
Baz
Fri December 18, 2009 5:20am
Rating: 10
|
Under_car_exhaust_from_rear_Small_
|
|
Baz
Fri December 18, 2009 5:21am
|
Under_car_exhaust_from_front_Small_
|
|
fastd
Fri December 18, 2009 5:54pm
Rating: 10
|
ERA Under Car Custom 2.5" Exhaust Photo #2
|
|
