DocDirk
Wed April 8, 2009 8:38pm
|
Right rear lower link arm at axle
Rotated view of rear lower link arm right side showing square link arm attached inside a square receptacle on the axle...very little or no room for rotaion with axle movement.
|
|
kitcarbp
Mon April 13, 2009 6:36am
Rating: 10
|
Modified Lower Radiator Hose
Here is the modified lower hose to keep the surge tank on the LOW pressure side (water pump inlet) of the system. Not the most elegant but very functional. I found a glass filled nylon "T" taht is 1.75" and has a 1.0" fill line for the surge tank.
|
|
kitcarbp
Mon April 13, 2009 7:01am
Rating: 10
|
Lower Rad Hose with "T"
Here is a close up of the "T" installed in the lower hose.
|
|
Rob. Smith
Fri August 21, 2009 7:16am
Rating: 10
|
Handbrake_handle_1
I rebuilt the tunnel lower than the original but I raised the handbrake up and away from the seat.
|
|
scales
Sun September 6, 2009 3:42pm
|
Alternative to a prop-rod or chains.
Used a large Turnbuckle from Lowes to keep the hood up.
|
|
boris_thespider
Tue October 6, 2009 2:49pm
|
Lower_Radiator_Fan_Brackets2_opt
|
|
boris_thespider
Tue October 6, 2009 2:49pm
|
Lower_Radiator_Fan_Spacers_opt
|
|
cay5628
Sat November 14, 2009 10:27am
Rating: 10
|
Dynatek Injection
I'm using Dynatek Classic Fuel Injection (Now Dynaforce). Engine made 560 hp at 5400, 580 ft lb at 4700. Had 480 ft lb in at 2500 rpm. Lots of low end power.
|
|
kitcarbp
Mon November 23, 2009 12:50pm
Rating: 10
|
ps_cooler_connections
Derale Frame Rail Oil cooler for power steering with -6AN full swivel connections. This mounts down low in front of my radiator.
|
|
Silverback51
Tue December 29, 2009 8:14am
Rating: 10
|
DSC_0247a
Worn rear lower shock mount on the A-Frame
|
|
52chevyred
Fri January 1, 2010 7:50am
|
Street Beasts Driver Sidepipe
Here is the Street Beasts sidepipe on the driver side. Another lesson learned: if you use a 351W for mock up and are installing a 302, THERE IS A DIFFERENCE! The 302 is 2" narrower (at the head) and about 1" lower (at the head) than the 351. We had to "adjust" the motor mounts when I put the dummy 302 in.
|
|
Blittleton
Sun January 3, 2010 4:02pm
|
Low Profile Domed Filters
|
|
Blittleton
Sun January 3, 2010 4:02pm
|
Low Profile Domed Filters
|
|
kitcarbp
Fri January 22, 2010 12:19pm
Rating: 10
|
V8 oil cooler
Ford Explorer V8 oil cooler. LONG made this OEM oil cooler for the mid 90's Explorers, if I can shoe horn this into place, it just might be the cooler I was looking for to keep the 460 oil temps uniform. This is hooked up in-line with the lower rad hose. This should have very good water flow rates to cool the oil.
|
|
rdc767
Thu April 8, 2010 8:40am
|
nose lower insert
nose lower insert
|
|
