52chevyred
Fri January 1, 2010 7:50am
|
Street Beasts Passenger Sidepipes
I bought the sidepipes "bare" from Street Beasts to save about $1,200 they wanted to coat them. I can get them done for about $500
|
|
kitcarbp
Fri January 22, 2010 12:19pm
Rating: 10
|
V8 oil cooler
Ford Explorer V8 oil cooler. LONG made this OEM oil cooler for the mid 90's Explorers, if I can shoe horn this into place, it just might be the cooler I was looking for to keep the 460 oil temps uniform. This is hooked up in-line with the lower rad hose. This should have very good water flow rates to cool the oil.
|
|
Wazza
Mon January 25, 2010 6:01pm
|
New Cobra build
The Thunderbird IRS means that the 3 inch system can't be tucked away as much as I wanted...might leave it on show like this.
|
|
*13*
Sat January 30, 2010 9:52am
Rating: 10
|
427 289
La Canada 1-30-2010
|
|
FUNFER2
Sat February 6, 2010 5:24am
Rating: 10
|
Polished 304 stainless steel "Gilmore" Kit. Muffler
The muffler does not have glass pack to be blown out, but rather louvers. They can be placed going forward, to quite the sound but, it hurts the torque some.
|
|
JCoop
Sun February 14, 2010 7:53am
|
L underside #1052
shows greasable swaybar bushing and Canton 7 qt. oil pan.
|
|
rokndad
Thu March 18, 2010 9:30pm
|
|
Rick 427 Cobra
Fri March 26, 2010 5:40pm
|
BRAKE CANS, SO LONG GIRLING!
|
|
magda
Fri April 16, 2010 12:49pm
|
Python
This engine bay belongs to a famous F1 racer 4.6lt with supper charger 610hp engine by Seah Hyland Motorsport Canada on pump gas
|
|
Z-linkCobra
Mon April 26, 2010 2:36pm
|
Finally done!!
I feel like I have turned a corner with getting the hood and trunk hinged and functional. I still cant see the light...but at least I can see the next corner.
|
|
Wbulk
Fri May 7, 2010 11:44am
Rating: 10
|
Ball Joint Seal Ring
This is a Fix for A Arms that use the Chrystler ball joint without a seal groove machined in. This one was from B and B. A 3/16" steel ring was added to accept the ball joint seal. It was tack tig welded on the outside edges. The rings were cut on a water jet by Kirkhams Motorsports. Barry McGill can also do the fix.
|
|
Wbulk
Sun May 9, 2010 9:03am
Rating: 10
|
Ball Joint Seal Ring
A fix for A Arms shipped without the ball joint seal groove machined in. Ring added to accept a Chrystler Ball Joint Seal. The 3/16" thick rings were cut on Kirkhams Motorsports water jet. Barry McGill can also do the fix. The bad thing was B&B sent me the wrong arms that I paid to get fixed.
|
|
lal Naja
Wed June 2, 2010 9:53pm
|
Setting up the bell housing
This is as close as I can get it. Well within mfg's. specs.
|
|
FWB
Tue June 8, 2010 4:08pm
Rating: 10
|
|
tomcat racing
Fri June 11, 2010 1:30am
|
|
