cobrajeff
Sun November 21, 2004 6:47am
Rating: 10
|
Weber Guages
Two on top left hold float to proper height; two lower left are for measuring float level. Top right is tang-bending tool, lower right is to measure fuel inlet needle setting. (center tools perform same functions as the two on left, just slightly different designs).
|
|
cobrajeff
Sun November 21, 2004 12:19pm
Rating: 10
|
351C Port Plates
351C 4V intake on top; 351C SVO "High-Port" intake on bottom. Note how MPG intake side "port plates" would reduce 4V port openings to the same size as SVO high-ports (!).
|
|
Michael C Henry
Tue December 14, 2004 9:00am
Rating: 10
|
Drivers_left_thigh_rest
not my idea but it works great same height as hinge .lets left thigh brace off of it
|
|
LwCwb
Sun December 26, 2004 1:50pm
Rating: 10
|
My Cobras
Its just not the same...
|
|
cobrajeff
Tue December 28, 2004 12:37pm
Rating: 10
|
C4 Servos
Comparison of original "C" Intermediate Servo (on left) versus reproduction "C" Servo (note same part numbers, but no Ford oval on the repro).
|
|
cobrajeff
Wed December 29, 2004 10:46am
Rating: 10
|
Feinstein @ ARRC 1974
Sam Feinstein leads a 'Vette thru the front straight at Road Atlanta during the 1974 SCCA ARRC runoffs.
|
|
simon clemens
Wed January 26, 2005 7:12am
|
Firewall fabrication
All folds were made with oxy and clamped angle iron. Brake booster and clutch master fit perfectly. I will have the firewall ceramic coated the same as the exhaust, this should help keep my feet cooler in the footwell.
|
|
simon clemens
Wed January 26, 2005 7:12am
|
Firewall fabrication
All folds were made with oxy and clamped angle iron. Brake booster and clutch master fit perfectly. I will have the firewall ceramic coated the same as the exhaust, this should help keep my feet cooler in the footwell.
|
|
london
Sun January 30, 2005 8:27am
Rating: 9.8
|
AC Ace
Same shape as new 2005 Ac Ace Classic
|
|
lovehamr
Mon March 7, 2005 8:59pm
|
hood_tach007
Same car after an accident. Sheet metal came from a Boss w/shaker, so what the heck! Tach is in the same place on hood.
|
|
Double Venom
Mon April 4, 2005 5:53pm
|
My sweetie-2
Notice the same great smile as pre-op.
|
|
simon clemens
Mon April 18, 2005 5:02am
|
Custom Tailshaft
Supra slip yoke joined to a modified Commodore tailshaft. The uni joints are the same as Ford.
|
|
froggyman
Sun April 24, 2005 9:39pm
Rating: 9.6
|
Sam Jackson SPF1312
Sam's car in Branson, MO during SSR5
|
|
simon clemens
Mon May 9, 2005 4:27am
|
Dash LHS
With a few bends the dashboard is starting to take shape.
The 4mm Aluminium dash was bent useing an Oxy torch, and two thick clamping plates to sandwich the edge of the bend.
The face of the dash follows the same curve as the body, I just wanted something different... 90% of cobras have a flat/straight dashboard.
|
|
lovehamr
Wed May 18, 2005 11:07am
Rating: 10
|
Tach_internal3
Taken from Ford instructions dated 3-26-69. Obviously not the same as my tach.
|
|
