RJCCOBRA
Wed January 21, 2009 3:45pm
|
Shell Valley build
We're back working on getting the doors, hood, and trunk lid to fit. We had to grind half of the inner door structure to get it to fit. Now we need to do some fiberglassing to make the door structurally sound.
|
|
RJCCOBRA
Wed January 21, 2009 3:46pm
Rating: 1
|
Shell Valley build
The hood was bowed and warped so badly that we had to cut slots in the inner panel, fill with foam, and then add weight to level out the passenger's side. After the foam hardened, we put a layer of glass over the cuts and added weight again.
|
|
RJCCOBRA
Fri January 23, 2009 2:43pm
|
Shell Valley build
Here's the hood after we straightened it and put the first layer of glass cloth on the inner panel.
|
|
RJCCOBRA
Thu January 29, 2009 3:22pm
|
Shell Valley build
Got the hood prop rod fabricated and installed. I used a piece of 5/16 inch OD 304 stainless and a stainless sherical rod end.
|
|
jdean
Fri January 30, 2009 6:36pm
Rating: 10
|
|
Clois Harlan
Mon March 9, 2009 6:32pm
|
The Bonnet rod and bearing pivot
Extremely durable and sturdy to yaw movement.
|
|
Dwight
Sun March 15, 2009 9:26am
Rating: 10
|
aluminum hood scoop
aluminum hood scoop
|
|
Three Peaks
Thu March 19, 2009 3:20pm
Rating: 10
|
|
Three Peaks
Thu March 19, 2009 3:20pm
Rating: 10
|
|
Three Peaks
Thu March 19, 2009 3:21pm
Rating: 10
|
|
Hawkeye
Wed April 29, 2009 8:02pm
|
|
cay5628
Sat May 2, 2009 10:15am
|
Body
Picked up the body in March. Good quality, doors, hood and trunk lid already hung
|
|
AC Cobra
Thu May 7, 2009 11:11am
Rating: 10
|
Hood up
Resting after a 100 mile ride.
|
|
capteddie
Tue June 2, 2009 10:45am
|
|
Hawkeye
Fri June 12, 2009 11:05am
|
Paint Shop(Extend under hood scoop)
|
|
