Earl J
Mon April 14, 2014 1:45pm
Rating: 10
|
Early 48IDA parts from Jim Inglese
Jim had to scour his LA contact for the early #50 Pump Jets. He mentioned to me these were extremely hard to source as these are for the early 48IDA & 48IDA-1 Carbs. He had to re-size a few of them to #50
|
|
Earl J
Mon April 14, 2014 2:03pm
Rating: 10
|
Bell-Crank close-up
Notice the Block I painted black. I stamped in a pointer (V painted in white) points to a scribed Red line on the #2 runner (just below the ARP carb stud). That is an indicator for me to view is my linkage is out of alignment. I hasn't moved once from the day i installed and adjusted it.
|
|
Earl J
Mon April 14, 2014 2:03pm
|
Return Spring and mounting bracket
I thought this was rather clever of me. That bracket curves around and clears the distributor body where I drilled and tapped a 10/31 heim joint for the dual return spring to connect. There is no binding on the return spring as well.
|
|
Earl J
Mon April 14, 2014 2:03pm
Rating: 10
|
R Model, Radiator (W-MO 6-22) & Oil Cooler
The cooling system for both oil and water are standard R Model (original pieces) also the Dayco race checkered race belt
|
|
Donunder
Thu April 24, 2014 4:44pm
Rating: 10
|
|
PSYCHO
Wed May 14, 2014 2:27am
|
New arrival
Another present delivered today hehehehe 
|
|
52chevyred
Sun May 18, 2014 4:34pm
Rating: 10
|
Door Bolt Hole Spacing
The bolt holes are on 4" centers.
|
|
52chevyred
Sun May 18, 2014 5:43pm
Rating: 10
|
Fiberglass Cut for Hinge
OK, this may be a little more fiberglass than you are willing to cut. I don't know how much would be cut with the "Original" SB hinge. I have not had any problems on my doors. This picture is not my door, but a similar one.
|
|
PSYCHO
Wed June 18, 2014 2:36am
|
IMG_04502
looking at the gear selector position oops looks like mods are in order
|
|
PSYCHO
Wed June 18, 2014 2:36am
|
IMG_04522
insepction cover is there but not much under it so will have to do some shopping around to find whats available
|
|
PSYCHO
Wed June 18, 2014 2:36am
|
IMG_0458
the starter motor actully goes around the other way but im sure you get the drift
|
|
PSYCHO
Wed June 18, 2014 2:43am
|
IMG_04701
new toy Tig, Arc and Plasma Cutter all in one
will have to mess about learning how to Tig thing together Hehehee
|
|
EarlsflyinCobra
Wed June 25, 2014 11:38am
|
Top of hood
Outlined area is where the hood hits the intake, hood scoop is 23 1/2" long, 14 1/2" wide in the front, 13" wide in the back, and 1 7/8" high in the center.
|
|
52chevyred
Sun August 3, 2014 3:51pm
|
Car Shows 2014
These photos are from the different car shows for 2014.
|
|
Pete Munroe
Mon September 22, 2014 8:23pm
Rating: 10
|
Mickey Thompson S/R radials 26x12
M/T S/R radials size 26x12. Tires work great are much stickier than a standard street radial IMHO.
|
|
