Z-linkCobra
Fri January 22, 2010 7:29am
|
Oops
Thne I figured out it woudnt fit the tunnel. Sorry about the confined space in the passenger floor board honey.
|
|
hsv300
Fri February 5, 2010 3:33pm
|
|
FUNFER2
Sat February 6, 2010 5:18am
Rating: 10
|
Hanger
This hanger has a weld tab that is shaped to fit the muffler housing and with the supplied bolts, is adjustable.
|
|
FUNFER2
Sat February 6, 2010 5:36am
Rating: 10
|
Polished 304 stainless steel pipes. "Gilmore Kit".
Collector into muffler. Notice how the collector slides between the muffler & muffler housing, for a nice tight & clean fit. Requires only a small tig weld.
|
|
FUNFER2
Sat February 6, 2010 5:41am
Rating: 10
|
Polished 304 stainless steel side pipes."Gilmore Kit"
Turn out. Notice how it slides between the muffler & muffler housing, for a nice tight & clean fit. Requires only a small tig weld. Use filler rod if you wish to smooth the weld.
|
|
63mercury
Thu February 11, 2010 6:30pm
|
My Cobra build
fitting the body
|
|
63mercury
Thu February 11, 2010 6:30pm
|
My Cobra build
fitting the body #2
|
|
63mercury
Thu February 11, 2010 6:30pm
|
My Cobra build
fitting the body #3
|
|
Z-linkCobra
Thu February 18, 2010 8:25am
|
Trunk hinge support
When I got this kit the trunk lid and hood were not attached to their frames. So before joining the two together I figured I would give the hinges something solid to bolt to...and also add some strength. The holes are 5/8 and I am making some press fit threaded collars to put in the holes for 3/8 bolts.
|
|
alfy65
Sun March 7, 2010 6:01am
Rating: 10
|
|
cameron02
Fri April 16, 2010 8:34pm
|
Fuel pressure gauge
fitting fuel pressure gauge
|
|
cameron02
Fri April 16, 2010 8:34pm
|
Fuel pressure gauge
fitting fuel pressure gauge
|
|
63mercury
Sun April 25, 2010 7:20pm
|
Cobra Build
More body fitting
|
|
63mercury
Sun April 25, 2010 7:20pm
Rating: 10
|
Cobra Build
More body fitting
|
|
Badvnm
Mon April 26, 2010 12:39pm
|
My Dream Car
No store bought Headers here mame, These were made to fit..
|
|
