RobV
Mon June 13, 2005 7:18pm
|
Assembling the oil cooler
To fit the oil cooler, I had to remove the rivets from one half and reinstall the bottom shroud after the cooler was in place.
|
|
simon clemens
Sat July 23, 2005 6:59am
|
O2 Sensor
Exhaust oxygen sensor nut will be welded into the collector, so the sensor can be screwed into place.
|
|
boxhead
Mon October 10, 2005 5:30am
|
Centre dash support
Here you can see the centrre dash support I have made.
The flat piece is removed when the dash is in place.
|
|
boxhead
Sun June 18, 2006 4:36am
Rating: 10
|
P1000474
I think this is an old Ford Anglia roadster, It has the left hand door welded closed and body filler in the gaps, Also the rear arches have been moulded to the body and some big flares fitted aswell.
The front of the chassis has what appears to be box section steel welded in place.
I am taking a guess that this is possably an ex speedway car or home made rod of some sort.
Now I have to decide if I want to drag it out and get it home, might look good in the garden?
|
|
1985 CCX
Sat October 14, 2006 5:18am
Rating: 10
|
Lucas Panel Rheostat and Wiper Switch in place.
Correct Lucas Wiper Switch and Panel Rheostat installed.
|
|
496fe
Tue July 24, 2007 9:15pm
|
Nitrous Tubes Installed In Victor Manifold
JB Welded in place. Had already passed backfire test.
|
|
imagine2frolic
Thu January 17, 2008 7:36am
Rating: 10
|
BBQ HAULER
I drag those pits all over the place. Once from Jax to Fort Benning for a wedding in Georgia.
|
|
RJCCOBRA
Tue November 25, 2008 2:59pm
|
Shell Valley build
Rear view of the roll bar with the down legs tack welded in place.
|
|
sganz
Tue December 23, 2008 9:03am
|
Sitting at 'The Warehouse'
This is the front shot of the car after paint sitting at my friends place.
|
|
Danr55
Sun March 1, 2009 5:05pm
Rating: 10
|
Hooters Car Show
Second Place. A lot!
|
|
Wbulk
Mon December 7, 2009 5:10pm
Rating: 10
|
Gas Filler Modification
Modification to a B and B fuel filler. It is just setting in place. The LeMans cap still has to be drilled.
|
|
Dangerous Doug
Mon April 26, 2010 9:35pm
Rating: 10
|
Two to help roll it off the trailer
Tim and Doug came by to help me roll my Cobra off the trailer and into the garage. Complicated by the fact the steering column is not in place. I worked the brakes...
|
|
Wbulk
Fri June 11, 2010 5:56pm
Rating: 10
|
Upper Shock Mounts
New upper shock mounts tacked into place. These allow for a longer shock to be used.
|
|
Z-linkCobra
Mon October 11, 2010 6:21am
|
Filter mount
Took a peice of 2" aluminum pipe and made this filter mount. The filter slides in and there are 2 set screws on either end ring to hold the filter in place. I didnt like the way the band clamps looked.
|
|
justcobra
Sun January 6, 2013 7:25pm
|
RMC Series 3
Doors opened with red seats in place.
|
|
