fastraxsg
Wed April 18, 2012 8:29am
|
dash
Dash is mounted...photo isn't reversed, its a right hand drive car. Added a Dakota digital gear indicator to the right of the steering wheel as it is an automatic, have both left and right turn indicators and moved the high beam toward the center. Using LED's for flashers and high beam. Glove box door is going to be a pain to install, have to insert raised surface inside to mount hinge. Huge space so will mount CD player inside. Key right, horn left. Dimmer switch on floor.
|
|
cobrajeff
Fri December 28, 2012 3:44am
Rating: 10
|
Space-Saver spare on Campagnolo rim
Weldcraft Wheels in Livonia, MI narrowed a 7" wide Pantera rim down to 5.5" so that I could mount a collapsible Space-Saver spare tire on it.
|
|
LightNFast
Mon February 18, 2013 9:33am
Rating: 10
|
FIA_Suitcase_Study1
It’s documented that (2) AC factory cars were prepared with FIA suitcase "dimples" (See Photos). The second modification was to enlarge the trunk base to allow the suitcase to fit upright (vertical) and further down into the trunk as shown. If you look closely at the photo you can see the suitcase also fit horizontal and was held in place with a “bungee cord”. You can also see the bolts protruding out the bottom of the suitcase which originally held the suitcase upright. I think this also explains why some of the FIA cars had dimples while others didn’t.
As for the actual size of the suitcase – FIA Historic Racing Championships - Appendix J. Both 1964 and 1965.
State:
“270 - Luggage trunk
A covered space being an integral part of the coachwork but outside of the space occupied by the front seats, large enough to receive a trunk of
65 cm X 40 cm X 20 cm. minimum, besides the spare wheel, tools or the folded hood, shall be provided, excluding the spare wheel, tools or removed canopy.”
|
|
Dwight
Mon April 28, 2014 6:43pm
|
KCC visit to North Alabama
KCC visit to North Alabama, Chattanooga Cobra Club, Huntsville Space and Rocket Center
|
|
52chevyred
Sun May 18, 2014 5:43pm
Rating: 10
|
Driver Door Modified Hinge Installed
Driver Door Modified Hinge Installed, using 4" Pipe spacer.
|
|
cycleguy55
Sat September 13, 2014 7:42am
Rating: 10
|
Mirror & Pedestal Spacer
Spacer made from 1/2" aluminum stock
|
|
xb-60
Mon December 28, 2015 5:00pm
Rating: 10
|
PACE and space - Don is 195cm tall
|
|
rodneym
Tue January 26, 2016 12:00pm
|
FE pilot bushing
FE pilot bushing. One on left has interference due to a batch of Quicktime BH's being a bit shallow (from late 2009/early2010). One on right is a simple, cheap approach rather than a new BH or spacers.
|
|
csx4910
Thu January 28, 2016 2:28am
|
Mac Tool MAcsimizer Tool Chest for Sale
Darrell Gwynn's Mac Tools MB1900 roller cabinet with over 48,000 cubic inches of storage space. Full extension drawers for easy access to tools. Drawers are fully interchangeable for custom organization. Size 88"x47"x27" $10000 new , asking $6000
|
|
patrickt
Mon October 24, 2016 10:34am
|
|
patrickt
Mon October 24, 2016 10:34am
|
|
patrickt
Mon October 24, 2016 10:34am
|
|
patrickt
Mon October 24, 2016 10:34am
|
|
patrickt
Mon October 24, 2016 10:34am
|
|
Dan Case
Mon March 11, 2019 1:56pm
Rating: 10
|
427 Cobra carburetor leveling spacer
|
|
